Bedienungsanleitung Kenwood xd 551 (Seite 59 von 64) (Englisch)

159920

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

XD-SERIES (En)

Preparation section Basic section Application section Knowledge sections

Cleaning the head section

There are precisely aligned parts around the heads, including the tape guides.

When cleaning, pay special attention so as not to apply shock to them.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a

great difference in temperature between this unit and the outside.

This unit may not function properly if condensation occurs. In this

case, leave the unit for a few hours with the power left ON, and

restart the poeration after the condensation has dride up.

Be specially cautious against condensatin in a following

circumsatance:

When this unit is carried from a place to another across a large

difference in temperature, when the humidity in the room where

this unit is installed increases, etc.

Important Items

Note

Reference

Maintenance

Demagnetizing the head

When the recording / playback head is magnetized,

the sound quality will deteriorate. In such a case,

demagnetize the head using a commercially avail-

able demagnetizer (head eraser).

Cleaning the heads and peripheral compo-

nents

For maintaining the best condition of the deck and

for longer service life, always keep the heads (re-

cording / playback / erase), capstan and pinch roller

clean. To clean them, perform the following:

1. Open the cassette holder.

2. Using a cotton swab dipped in alcohol, clean the

head (recording / playback / erase), capstan and

pinch roller carefully.

Note related to transportation and movement

(CD player)

Before transporting or moving this unit, carry out the following

operations.

1. Turn the power ON but do not load a disc.

2. Press the 6 key.

3. Wait a few seconds, and ensure that the display is as shown

below.

4. Wait for a few seconds then turn power off.

Sound Retrieval System manufactured under licence from SRS Labs,

Inc. “SOUND RETRIEVAL SYSTEM” and the SRS

Symbol

SRS

are trademarks of SRS Labs, Inc.

Purchase of this product does not convey the right to sell recordings

mode with the SOUND RETRIEVAL SYSTEM.

Maintenance of the set

When the front panel or case becomes dirty, wipe with a soft, dry

cloth. Do not use thinner, benzine, alcohol, etc. for these agents may

cause discoloration.

In regardto contact cleaner

Do not use contact cleaners because it could cause a malfunction.

Be specially careful not to use contact cleaners containing oil, for

they may deform the plastic component.

When your unit needs to be repaired, bring the entire set (Speakers

excluded) to your dealer.

Capstan

Pinch roller

Head

Tape guides

Cotton swab

Stored contents which are

cleared immediately when

power plug is unplugged from

power outlet

Clock display

Stored contents which are

cleared in at least a day after

power plug is unplugged from

power outlet

Amplifier

POWER status (ON or OFF)

Input selection

Volume control value

Equalizer’s manual memory cre-

ated by the user

SRS 3D level

Tuner unit

Receiving band

Frequency

Preset stations

Program timer setting contents

Cassette deck unit

Transport direction

DOLBY NR

Reverse mode

Memory backup function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood xd 551 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info