Bedienungsanleitung Kenwood xd 653 (Seite 52 von 60) (Englisch, Holländisch)

157441

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Knowledge section

Maintenance

Cotton swab

Tape guides

Pinch roller

Head

Capstan

Cleaning the head section

There are precisely aligned parts around the heads, including the tape guides.

When cleaning, pay special attention so as not to apply shock to them.

Cleaning the heads and peripheral components

For maintaining the best condition of the deck and for longer service life, always keep

the heads (recording / playback / erase), capstan and pinch roller clean.

To clean them, perform the following:

1. Open the cassette holder.

2. Using a cotton swab dipped in alcohol, clean the head (recording / playback / erase),

capstan and pinch roller carefully.

Demagnetizing the head

When the recording / playback head is magnetized, the sound quality will deteriorate.

In such a case, demagnetize the head using a commercially available demagnetizer

(head eraser).

Reference

Note

Maintenance of the unit

When the front panel or case becomes dirty, wipe with a

soft, dry cloth. Do not use thinner, benzine, alcohol, etc.

for these agents may cause discoloration.

In regard to contact cleaner

Do not use contact cleaners because it could cause a mal-

function. Be specially careful not to use contact cleaners

containing oil, for they may deform the plastic component.

Stored contents which are

cleared immediately when

power plug is unplugged

from power outlet

Clock display

Stored contents which are

cleared in at least a day after

power plug is unplugged

from power outlet

Amplifier

POWER status (ON or OFF)

Input selection

Volume control value

Balance level

Equalizer’s manual memory

created by the user

3D surround level

Tuner unit

Receiving band

Frequency

Preset stations

Program timer setting con-

tents

Cassette deck unit

Transport direction

Tape Equalizer

Reverse mode

Other

Language

Memory backup function

Notes related to transportation and movement

Before transporting or moving this unit, carry out the

following procedures.

1 Turn the power ON but do not load a disc.

2 Press the CD 6 key.

3 Wait a few seconds, and ensure that the display is

as shown below.

4 Wait for a few seconds then turn power off.

Important Items

Caution on condensation

Condensation (of dew) may occur inside the unit when there

is a great difference in temperature between this unit and

the outside.

This unit may not function properly if condensation oc-

curs. In this case, leave the unit for a few hours with the

power left ON, and restart the operation after the con-

densation has dried up.

Be specially cautious against condensation in a fol-

lowing circumstance:

When this unit is carried from a place to another across a

large difference in temperature, when the humidity in the

room where this unit is installed increases, etc.

IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT

TO MAKE COPIES OF TAPES OR DISCS WITHOUT THE

PERMISSION OF THE COPYRIGHT OWNERS. ANYONE

WISHING TO COPY COMMERCIALLY AVAILABLE TAPES

OR DISC SHOULD CONTACT THE MECHANICAL COPY-

RIGHT PROTECTION SOCIETY LIMITED OR THE PER-

FORMING RIGHTS SOCIETY LIMITED.

WARNING NOTICE:

No Disc

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood xd 653 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info