XD SERIES (En/E2)
34
Preparation sectionBasic sectionApplication sectionKnowledge sections
Let's record
Adjusting the recording level
Restarting recording
The following procedure allows to re-record sound from the
middle of recording.
The following procedure assumes the presence of a non-
recorded section of 4 seconds before the recording start
position.
1Press the key during recording.
2Return the recording source compo-
nent to the position you want to
restart recording, and put the source
component to pause mode.
3Press the REC/ARM key twice.
4Press the REC/ARM key once.
5Play (Receive) the music to be re-
corded.
÷ Recording is stopped, the tape is returned to the recording start
position, and the deck enters stop mode after leaving a non-recorded
section of about 2 seconds after the previous music.
÷ If there is no music recorded before the recording start position, the
deck enters stop mode after tape rewinding.
1Perform the procedure of “Record-
ing” until step 4.
¤
2Adjust the recording level.
3To restart recording
÷ If the recorded sound is too large or distorted, decrease the recording
level. If it is too low, increase the recording level.
O p π
O p π
O p π
O p π
O p π
LEVEL
ADJUST
REC / ARM
1¡
REC / ARM
REC / ARM
When the tape is
moving 3 way.
When the tape is
moving 2 way.
The adjustment range is
between -2 ~ +2.
Blinks.
8
PAUSE
REC / ARM
REC / ARM
÷ The deck enters record-pause mode after leaving a non-recorded
section of about 4 seconds.
÷ In case recording is restarted from the beginning of a tape, feed the
leader tape (the non-recordable section at the beginning of each side of
tape) manually before starting recording.
÷ When recording a CD, the CD playback and tape recording can be
started simultaneously by pressing the CD play (6) key in step 4.
In a few sec., REC/ARM and
PAUSE keys light up.
Lights
