Bedienungsanleitung Kenwood XD-DV60 (Seite 46 von 72) (Englisch)

730374

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Operations

XD-series (EN/T,M,X)

Set Up functions

Set up menu

The initial setup of the player, which has been made at the factory, can be changed to the desired setup.

1 During stop mode, press MENU

key on the remote.

Audio / Subtitle :

This sets the language to be used when playing a disc. (If a disc does not contain the recording the selected

language, it is played in the priority language set for each disc.)

Menus : This sets the initial setup of language as well as the language used in on-screen messages such as “PLAY”.

Rating : This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.

However, even when a DVD disc is marked “Adult-oriented” or so on the label, its viewing cannot be

restricted unless the restriction level is recorded in the disc itself.

Password : The password for rating setting, change, cancellation, etc. is set.

TV Aspect : This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.

4 x 3 letterbox : Choose this setting if you would prefer to see movies in their original aspect

ratio. You will see the entire frame of the movie, but it will occupy a smaller

portion of the screen. This setting may result in the movie appearing with

black bars at the top and bottom of the screen.

4 x 3 Pan Scan : Choose this setting if you want the movie to fill the entire screen of your TV.

You won’t see part of the picture (particularly the right and left edge).

Some disc produced in a wide screen format can’t be cropped in this fashion,

which means the black bars would appear at the top and the bottom of the

screen.

16 x 9 Widescreen : Choose this setting if your DVD player is connected to a widescreen TV.

Dynamic Range : This is set to ON when the volume change should not become overly large, for example when listening

late at night.

Digital Audio Out : This sets the Digital audio output mode.

Speaker Setup :

Current setup menu display appears on

the screen.

2 Press Cursor up/down (5/∞) keys

on the remote to select the item,

then press the ENTER key to ac-

cess the sub features

(disc languages)

How to use the RETURN key

When the RETURN key is pressed, the display returns to the previous screen (STOP

mode).

RDS

∞

ENTER

RETURN

(Palental Lock)

This is used to select the size of the connected speakers, to adjust the volume, and for setup of the

delay time.

Return button: When this is selected and the ENTER key is

pressed, return will be made to the previ-

ous screen.

Play: When this button is selected with a

stopped disc and the ENTER key is pressed,

playback will start.

Resume: When this button is selected with a disc in

resume status and the ENTER key is

pressed, resume playback will be started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood XD-DV60 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info