Bedienungsanleitung Kenwood ZJM300 (Seite 4 von 12) (Englisch)

678656

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Note:

For non-rewireable plugs the fuse

cover MUST be refitted when

replacing the fuse. If the fuse

cover is lost then the plug must

not be used until a replacement

can be obtained. The correct fuse

cover is identified by colour and a

replacement may be obtained from

your Kenwood Authorised Repairer

(see Service).

If a non-rewireable plug is cut

off it must be DESTROYED

IMMEDIATELY. An electric shock

hazard may arise if an unwanted

non-rewireable plug is inadvertently

inserted into a 13A socket outlet.

l

This appliance conforms to EC

Regulation 1935/2004 on materials

and articles intended to come into

contact with food.

before using for the first time

1 Wrap any excess cord around the

bracket f on the underside of the

powerbase.

2 Fill to ‘MAX’, boil, then pour the

water away. Repeat 3 times.

key

a lid

b water level gauge

c on/off switch

d power on light

e 360° powerbase

f cord wrap

g filter

to use your kettle

1 Fill the kettle through either the spout

or by removing the lid. The water

level must be between ‘MAX’ and

1 cup (250mls).

If you live in a hard water area we

recommend that you use filtered

water in order to maintain the

appearance and efficiency of your

kettle.

Be economical: do not boil more

water than you need.

To improve the quality of your drinks

always use fresh water.

Empty the kettle after each use.

Rinse out with fresh water if the

kettle has not been used for more

than 2 days.

2 Check the lid is fitted correctly.

3 Plug in and switch on. The power on

light d will come on.

4 Your kettle will boil and switch off

automatically. To re-boil, wait a few

seconds - the on/off switch needs

time to reset.

Note - To interrupt the boiling

ensure that the switch is

in the off position before

removing from the powerbase.

If you experience problems

with your kettle switching

on and off during use or

switching off before boiling,

check that the flat element

is free from scale - see

“descaling”.

Your kettle is fitted with a filter to

hold back limescale particles.

If you find drops of water under

your kettle, do not worry - it is just

condensation.

boil-dry protection

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

care and cleaning

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

Wipe with a damp cloth, then

dry. Do not use abrasives - they

will scratch the metal and plastic

surfaces.

the inside

Wipe with bicarbonate of soda on a

damp cloth. Rinse thoroughly.

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

the filter

1 Remove the lid.

2 Lift the filter out away from the spout

area 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood ZJM300 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood ZJM300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info