Bedienungsanleitung Kenwood ZJX770 (Seite 4 von 102) (Alle Sprachen)

678655

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

key

a spout

b finger pad

c flip top lid

d lid release button

e on/off switch

f water level guage

g 360° powerbase

h cord wrap

i filter

to use your kettle

1 Press the lid release button d to

open the lid, then fill the kettle. The

water level must be between ‘MAX’

and 1 cup (250mls).

If you live in a hard water area we

recommend that you use filtered

water in order to maintain the

appearance and efficiency of your

kettle.

Be economical: do not boil more

water than you need.

To improve the quality of your drinks

always use fresh water.

Empty the kettle after each use.

Rinse out with fresh water if the

kettle has not been used for more

than 2 days.

2 Close the lid by pushing down on

the finger pad area 1.

3 Plug in and switch on.

4 Your kettle will boil and switch off

automatically. To re-boil, wait a few

seconds - the on/off switch needs

time to reset.

Note - To interrupt the boiling

ensure that the switch is

in the off position before

removing from the powerbase.

If you experience problems

with your kettle switching

on and off during use or

switching off before boiling,

check that the flat element

is free from scale - see

“descaling”.

Your kettle is fitted with a filter to

hold back limescale particles.

If you find drops of water under

your kettle, don’t worry - it is just

condensation.

boil-dry protection

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

care and cleaning

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

Wipe with a damp cloth, then

dry. Do not use abrasives - they

will scratch the metal and plastic

surfaces.

the inside

Wipe with bicarbonate of soda on a

damp cloth. Rinse thoroughly.

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

the filter

1 Open the lid.

2 Lift the filter out away from the spout

area 2.

3 either rinse under the tap or use a

soft brush.

or when descaling your kettle, drop

the filter in too. Rinse thoroughly.

4 Place the filter back in the spout

area and push down to secure 3.

descaling

Regular descaling of the flat element

will improve the performance of your

kettle. If the kettle is not descaled

regularly the build up of limescale

may result in the following:

problems may be experienced

with the kettle switching on and

off during use or switching off

before boiling.

the kettle may take longer to boil.

the flat element may be damaged.

Please note: Failure to descale your

kettle may invalidate your guarantee.

When limescale starts to build up on

the heating element, buy a suitable

descaler and descale your kettle.

After descaling, boil with fresh water

several times and discard. Clean

any descaler off the kettle - it can

damage the parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood ZJX770 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info