Bedienungsanleitung Ketron SD1 PLUS (Seite 18 von 140) (Englisch)

677866

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

HOW TO SELECT A STYLE

There are twelve STYLES push buttons to the right of the display, each of which indicates a musical genre. For each of these Ketron has fore-

seen up to a maximum of 42 Styles. When, from the main page of the display and with the CUSTOM STYLE push button enabled (LED lit), you

press one of these STYLES push buttons the display shows five Styles on the right and another five on the left. The individual Style is called

up using the relative function key (F1-F10), situated at the side of the display that, when pressed, immediately enables the Style for the

Arranger. To check if the Style has been enabled simply look at the name that appears at the top of the central window of the display.

The SD1 stores the Styles of each kind of music in groups of ten and the number of the next groups is indicated as Pages. To call up the other

groups of Styles that are not currently displayed, simply press the STYLES push button again to which the groups belong or use the PAGE +/-

push buttons. The display will show the Styles that follow, which can be selected again using the relative push buttons at the side of the dis-

play (F1-F10).

HOW TO CONTROL THE ARRANGER

The Arranger controls are also described in the Arranger section.

Below are simply the main concepts.

●

To move the split point hold the SPLIT push button down.Then simultaneously press the key on the keyboard that will be the new split point.

●

To start the Arranger press the START push button.

●

To stop the Arranger press the START push button.

●

To add an Intro with the Arranger stopped, set the chord and press one of the three INTRO 1, 2, 3 push buttons.

●

To add a Fill-in with the Arranger running press one of the three FILL 1, 2, 3 push buttons.

●

To start the Arranger with the first chord played enable it using the dedicated push button (the LED lights up) KEY START

●

To start the Intro with the first chord enabled, select an Intro using one of the INTRO 1,2,3 push buttons and then play the chord (KEY START

INTRO ENDING 1, 2, 3)

●

To conclude an automatic accompaniment with an End, ensure that the JUMP push button LED is switched off (therefore disabled) and press

one of the followin push buttons with the Arranger running: INTRO ENDING 1, 2, 3

●

To call up one of the four variations, with the Arranger running, press one of the A,B,C,D push buttons.

●

To move on by one variation with the Fill In 1 and 2, enable it using the dedicated push button (the LED lights up) JUMP + FILL 1, 2

●

To go back by one variation with the fill In 3, enable it using the dedicated push button (the LED lights up) JUMP + FILL 3

●

To play over the whole keyboard and to acknowledge the chords, enable the function using the dedicated push button: PIANIST

●

To modify the tempo set on the Arranger, use the SLOW FAST push buttons

●

To create an Accelerando press the TAP push button repeatedly and briefly: RIT ACC (TAP)

●

To create a Ritardando, change the direction of the arrow by holding the TAP push button down for a few seconds and then press it repea-

tedly and briefly: RIT ACC (TAP)

●

To enter a break, press the BREAK push button.

●

To immediately end an arrangement with a short end, press the END push button: TO END

●

To stop an accompaniment when the next chord is released, enable the KEY STOP push button (the LED of the push button lights up) and

then play a chord very briefly.

●

To hold the arrangement only while the chord is played, enable these functions using the dedicated push buttons: KEY START+KEY STOP

●

To play the accompaniment again from the first beat, in whatever measure it currently is, press the RESTART push button.

●

To cut-out the accompaniment tracks, execept for the drum tracks, when no chord is played, disable the HOLD function using the dedicated

push button (the LED switches off): HOLD

●

To cyclically repeat all the Fill In’s, press a FILL 1, 2, 3 push button and hold it down.

●

To balance the volume of the Arranger with the lead played on the part of keyboard to the right of the split point, press these push buttons:

BALANCE +/- (VALUE +/-)

●

To restore the original tempo of the Style, press the PAGE +/- push buttons simultaneously

●

To repeat the Intro while a Style is playing, enable the function and then press one of the three Intro push buttons: JUMP + INTRO

●

To reproduce only the Ending while the Arranger is stopped, enable the function and press one of the following push buttons: JUMP + INTRO

●

To cut-out the timbres assigned to the part of keyboard to the left of the split point, press these push buttons simultaneously to mute the

volume: LOWER VOLUME

SD1 Owner’s Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ketron SD1 PLUS Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ketron SD1 PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info