677869
69
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
SAMPLER
The Sampler section of the X series enables the direct Sampling of any sound by means of the
Microphone input and also enables the control of. Wave files loaded externally via Floppy Disk.
The .Wave files are samples in Midi Sample standard Microsoft format.
The memory available for Sampling and .Wave files on the Ram Simm is 8 Mbytes.
Sampling is performed with 16 linear Bits with 44,1 KHz
sampling frequency.
The individual samples may be modified by means of a
sophisticate Edit and may be sub-divided into a number
of Splits (up to 32) to create Multiple-samples (Multiple-
sample .MSP).
The individual. Wave samples or the Multiple-samples
are assigned to Bank 2 - User Voice in the 8 locations
from no.17 to no. 24.
SAMPLER menu
To gain access to the Sampler menu:
1 Press F2 – Effects in the main display.
2 Then press key F3 – SAMPLER. The display shows the main Sampler display with a series
of functions.
Load: (F1) this function allows you to load Samples or Wave files present on Disk with an imme-
diate operation and without entering the general Disk menu.
To load the Samples from Disk:
1 Press F1- Load
2 Select the folder containing the samples from the Hard Disk using the numeric keypad
3 Choose the file to load using the Value buttons.
4 Press F 2 - Load to confirm. The file will be placed in the first free location among the 8 pro-
vided for the Sampler (Bank 2 - User Voice from no. 17 to no. 24).
Time: (F2) sampling time. The default value is 3,5 secs. but may be modified using the Value +/-
keys up to 7 secs.
Trigger: (F3) Input signal level threshold beyond which the Sampling starts automatically when in the
Start position. Lower the Trigger value, less input signal is required to start sampling; vice versa if the
Trigger value is higher, the sampling will start only when the signal reaches a high level.
However careful attention must be paid: in many cases (see Voice, Wind Instruments, Piano,
Guitar sampling) if a high Trigger value is left, there is the risk that the sound attack is cut with
the outcome of the original sound becoming rather unnatural.
It is therefore advisable to sample with Trigger values that are not excessively high (i.e. between
1 and 10). Any empty spaces between the sampling start and the actual sound attack may be eli-
minated later in Edit.
Loop: (F4) control of the type of Loop to be assigned to the samples. By pressing key F4 repeatedly
the 4 available Loop options are selected:
- FORWARD : in the Forward mode the Loop repeats a certain portion of the sample in a cyclic
manner, outlined by Loop and End points (See Edit), reading the sample forwards at all times.
This is the most commonly used Loop and may be achieved on a single sample Period
(PERIOD LOOP) or on a rather long portion (LONG LOOP).
- REVERSE : in the Reverse mode the sample is read backwards, from the end towards the
beginning. The sample transformation from Forward to Reverse mode is achieved automati-
66
69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ketron X-series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info