recorded on channels set in the MIDI channel Tx menu. With MIDI SETUP set on “General”, by
default the part -> channel association is the following (recommended one):
Part Channel
Preset (right) 1
2nd Voice (right) 2
Lower1 (left) 3
Lower2 (left) 4
Bass (left) 5
Chord1 (left) 6
Chord2 (left) 7
Chord3 (left) 8
Groove (left) 9
Drum (left) 10
Chord4 (left) 11
Chord5 (left) 12
Program voice1 (right) 13
Program voice2 (right) 14
Program voice3 (right) 15
Program voice4 (right) 16
By playing the keyboard on the left hand side of the split, the left parts are switched on, while by
playing on the right hand side the right parts are switched on. For example, on the left hand side in
the stop mode only the two lowers play whereas, if you keep start pressed and set a chord, the
drums will play together with the other parts of the style. The preset plays on the right hand side
but if you enter the program, the parts of the program or the 2nd voice will play if you access by
pressing the related button. If a channel is switched off, it will not be recorded by the sequencer.
The MIDI FILTER can be used to filter the events and the incoming and outgoing channels (by
default no event or channel is filtered). In order to filter the events so that they are not recorded,
you must first use the Cursor <> or Page <> buttons to select the event box on the IN column (inco-
ming). You can filter:: Note, Control Change, Program change, Pitch Bend, Aftertouch, Exclusive
Messages. In order to switch the filter on, press the F10 button to make the dot appear in the box.
The procedure is the same also for the channels. If you want to record an event or a channel
without playing it and exit at the midi out, the filter must be put in the OUT column.
Special mention must be made for the clock IN OUT boxes.
In this case, an empty box means that the clock is switched off. When the clock is set on IN, the
clock inside the sequencer is switched off. It has to be powered from the outside by means of a
midi or by switching on the internal mode (Start, Fills, etc.). If the clock is set on OUT, both
midi events and the midi clock will pass through the midi out. If the sequencer IN clock is swit-
ched on and so is the MIDI out clock (see MIDI CLOCK SOFTTHRU Menu), when the style is
switched on by pressing the Start button, the style clock out will also start the recording. On the
contrary, if the MIDI FILTER clock out and the MENU MIDI CLOCK SOFTTHRU clock in are
switched on, also the internal style will automatically start when the recording.
DEMIX: This function allows you to pick out every single recorded channel from a track and to
transfer it to other tracks so that, in the end, every track will have only one channel associated to
it. To demix a track from the main menu, select the track by using the Cursor<> or Page <> but-
84
