526377
9
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
9
9.0 General
Calculation of speed
With exercise machine, Racer, Crossbike:
60 pedal rotations result in a speed of 21.3 km/h.
With Cross Trainers:
60 pedal rotations result in a speed of 9.5 km/h.
Calculation of kilojoules
The calculation is based on the medium load level and only changes
through variation of the pedal frequency.
From a sport medicine point, with bicycling there is the following energy
consumption: 1 hour bicycling at 24 km/h uses 1680 kJ – 1 kilometer re-
sults in 70 kilojoules.
Cross Training the following energy consumption: 1 hour cross training at
9.5 km/h uses 3344 kJ – 1 kilometer results in 352 kilojoules.
Fitness grade calculation
The computer calculates and assesses the difference between load pulse
and recovery pulse and your resulting “fitness grade“ according to the fol-
lowing formula:
Mark (F) = 6 –
(
10 x (P1-P2)
)
2
P1
P1 = load pulse P2 = recovery pulse
Grade 1 = very good Grade 6 = insufficient
The comparison of load and recovery pulse is a simple and quick possibi-
lity to check your body fitness. The fitness grade is an orientation value for
your recovery ability after a physical load. Before you press the recovery
pulse key and determine your fitness grade, you should exercise in your
load area for a longer period of time, that is at least 10 minutes. With re-
gular cardiovascular exercising, you will determine that your “fitness grade“
will improve.
Average value calculation
For the calculation of the average value of speed, pedal rotations and pulse,
all exercising intervals are taken into consideration until the “reset“ function
is activated or the “temperature“ display appears.
Notes for measuring the pulse
The pulse calculation begins if the heart in the display blinks with the tact
of your pulse.
With hand pulse (not with Racer and Crossbike)
After pressing the recovery key, quickly clasp again the hand pulse sen-
sors or else the measuring of the pulse will be interrupted.
Avoid disturbing impulses.
A low voltage caused by the contraction of the heart will be registered
through the hand sensors and evaluated by the electronics.
Always clasp the contact surfaces with both hands.
Avoid jerky clasping.
Hold your hands quietly and avoid contractions and rubbing of the con-
tact surfaces.
With ear clip
The pulse sensor works with infrared light and measures the changes of the
transparency of your skin which are caused by your pulse. Before you put
the pulse sensors on your earlobe, rub it strongly 10 times to increase the
circulation.
Avoid disturbing impulses.
Carefully attach the ear clip to your earlobe and look for a good point
for the measurement (the heart symbol blinks without interruption).
Do not exercise directly with strong lights (e.g. neon light, halogen light,
spots, sunlight).
Avoid in any case shaking or instability of the ear sensor including the
cable. Using a clamp, always attach the cable to your clothing or even
better to a headband.
With chest belt
Read the corresponding instructions.
Disturbances in the pulse display
Check the battery voltage of the electronics and the chest belt.
Disturbances with the exercise computer
Note the kilometer status. With unusual behavior with the exercise compu-
ter, take out the batteries, check the battery voltage and reinsert the batte-
ries. The stored full kilometers are lost when the batteries are changed.
10. Exercise instructions
For your own safety
Before beginning exercising, check with your doctor to make sure that
you are healthy enough to exercise with this device. The medical finding
should be the basis for the design of your exercise program. The wrong
or excessive exercising can damage your health.
This exercise machine was developed especially for the leisure athlete. It is
excellent for cardiovascular exercises.
The exercising is to be designed methodically according to the principles
of endurance exercises. In particular changes and adjustments in the car-
diovascular system are generated. This includes sinking the relaxation pulse
and the load pulse.
Thus for the heart there is more time for filling the heart chambers and the
circulation of the heart muscle (through heart coronary arteries). Further-
more, the intensity of breathing and the amount of air which can be inha-
led (vital capacity) increases. Further positive changes take place in the
metabolic system. In order to reach these positive changes, you have to
plan exercising according to certain guidelines.
On the intensity of exercise
The intensity with exercising with the exercise machine is regulated on one
hand through the pedal frequency and on the other hand through the pe-
daling resistance. The pedaling resistance determines the end of exercising
with the brake force adjustment on the steering column. You should always
make sure that you don’t overstrain yourself and avoid overloading your-
self in view of the intensity. The wrong or excessive exercising can lead to
health damages.
Therefore control while exercising based on your pulse frequency if you
have determined your exercise intensity correctly. A basic rule for the suit-
able pulse frequency is:
180 minus age
This means that e.g. a 50 year old person should determine their endu-
rance exercises with a pulse frequency of 130.
Exercise recommendations based on this calculation is considered to be
reasonable by numerous accredited sport physicians. Therefore you should
set the pedal frequency and the pedal resistance when exercising in such
a way that you reach your optimal pulse frequency according to the above
named rule.
These recommendations are not only valid for healthy persons and are not
valid for people with cardiovascular diseases!
On the load amount
The beginner only gradually increases the load amount of his exercises.
The first exercise units should be relatively short and in intervals.
On the part of sport medicine, the following load factors are observed as
fitness positive:
Beginners should not begin with an exercise unit of 30 – 60 minutes.
The beginner exercises can be conceived in the following manner in the first
4 weeks:
Frequency Duration
daily 10 min
2-3 times weekly 20-30 min
1-2 times weekly 30-60 min
GB
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kettler-07861-870-comet-rs

Suche zurücksetzen

  • Die Einstellung der Widerstandsbremse funktioniert nicht. Eine Veränderung an der Rad von 1 bis 10 gibt keine Veränderung. Was kann ich tun?
    Eingereicht am 4-10-2018 12:44

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kettler 07861-870 Comet RS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info