3
Instructions for Assembly
■ Ensure that you have received all the parts required (see check list)
and that they are undamaged. Should you have any cause for com-
plaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
■ Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
■ Ensure that your working area is free of possible sources of danger,
for example don’t leave any tools lying around. Always dispose pack-
aging material in such a way that it may not cause any danger. There
is always a risk of suffocation if children play with plastic bags!
■ The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as instructed.
The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt, then use spanner to finally tighten nuts completely against
resistance (locking device). Then check that all screw connections
have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is
destroyed), and must be replaced.
■ To pull off the pedal arms remove cap and screw (A). Grip the pedal
arm tightly, and screw in an M12 bolt (not supplied) into the thread
(B). After a few turns you may take off the pedal arm (C).
■ For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
■ Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
List of spare parts
When ordering spare parts, always state the full article number, spare-part
number, the quantity required and the inspection number stamped on the back.
Example order: Art. no. 07939-980 / spare-part no. 10100030/ 2
pieces / inspection no......
Important: spare part prices do not include fastening material; if fastening material
(bolts, nuts, washers etc.) is required, this should be clearly stated on the order
by adding the words „with fastening material“.
KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
KETTLER International Inc. · 1355, P. B. 2747 · Virginia Beach · VA
23450 USA
http://www.kettler.net
For Your Safety
■ Exercise should be used only for its intended purpose, i.e. for
physical exercise by adult persons.
■ Any other use of the equipment is prohibited and may be dangerous.
The manufacturer cannot be held liable for damage or injury
caused by improper use of the equipment.
■ Exercise has been designed in accordance with the latest stan-
dards of safety. Any features which may have been a possible cause
of injury have been avoided or made as safe as possible.
■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the user.
■ Damaged components may endanger your safety or reduce the lifetime
of the equipment. For this reason, worn or damaged parts should
be replaced immediately and the equipment taken out of use until
this has been done. Use only original KETTLER spare parts.
■ If the equipment is in regular use, check all its components thor-
oughly every 1 -2 months. Pay particular attention to the tightness
of bolts and nuts.This applies especially to the securing bolts for
saddle and handelbars.
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.
■ Instruct persons using the equipment (in particular children) on pos-
sible sources of danger during exercising.
■ Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base your
program of exercise on the advice given by your doctor. Incorrect
or excessive exercise may damage your health!
■ Any interference with parts of the product that are not described within
the manual may cause damage, or endanger the person using this
machine. Extensive repairs must only be carried out by KETTLER service
staff or qualified personnel trained by KETTLER.
■ In case of enquiry, please contact your KETTLER dealer.
Handling the equipment
■ Before using the equipment for exercise, check carefully to ensure that
it has been correctly assembled.
■
Before beginning your first training session, familiarize yourself thoroughly
with all the functions and settings of the unit.
■ It is not recommended to use or store the apparatus in a damp room
as this may cause it to rust. Please ensure that no part of the machine
comes in contact with liquids (drinks, perspiration etc.). This may cause
corrosion.
■ The machine is designed for use by adults and children should not be
allowed to play with it. Children at play behave unpredictably and dan-
gerous situations may occur for which the manufacturer cannot be held
liable. If, in spite of this, children are allowed to use the equipment, ensure
that they are instructed in its proper use and supervised accordingly.
■ The exercise cycle complies with the DIN EN 957 - 1/5, class HB. It
is therefore unsuitable for therapeutic use.
■ A slight production of noise at the bearing of the centrifugal mass is due
to the construction and has no negative effect upon operation. Possibly
occurring noise during reverse pedalling result from engineering and
are absolutely safe.
■ Do not use corrosive or abrasive materials to clean the equipment. Ensure
that such materials are not allowed to pollute the environment.
■ The exercise cycle has a magnetic brake system.
■ To operate correctly, the pulse function requires a minimum voltage of
2,7 volts (only for computers working with batteries).
■ The equipment is dependent of revolutions per minute.
■ Please ensure that liquids or perspiration never enter the machine or
the electronics.
■ Before use, always check all screws and plug-in connections as well as
respective safety devices fit correctly.
■ Always wear suitable shoes when using.
■ All
electric appliances emit electromagnetic radiation when in operation.
Please do not leave especially radiation-intensive appliances (e.g.
mobile telephones) directly next to the cockpit or the electronic con-
trolsystem as otherwise values displayed might be distorted (e.g. pulse
measurement). ).)
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important
information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a
safe place for maintenance purposes or for ordering spare parts.
Assembly Instructions
GB
