Bedienungsanleitung Kettler Axiom - 07690-670 (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

735944

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Handling the equipment

ATTENTION! It is not recommended to use or store the appa-

ratus in a damp room as this may cause it to rust. Please ensure

that no part of the machine comes in contact with liquids (drinks,

perspiration etc.). This may cause corrosion.

■ Before using the equipment for exercise, check carefully to en-

sure that it has been correctly assembled.

■ Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect upon

operation. Possibly occurring noise during reverse pedalling re-

sult from engineering and are absolutely safe.

■ The exercise cycle has a magnetic brake system.

■ To operate correctly, the pulse function requires a minimum vol-

tage of 2,7 volts (only for computers working with batteries).

■ Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

■ Always wear suitable shoes when using.

■ For a comfortable training position please adjust the handlebar

andsaddle position to your body height.

■ Nobody may be in the moving range of a training person du-

ring training

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Al-

ways dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if

possible technically talented.

■ Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca-

reful when assembling this machine.

■ The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as in-

structed.

■ First, please screw all parts loosely together and make sure they

are properly positioned. Turn the self-locking nuts, first by hand,

until resistance is felt, continuing subsequently against the resi-

stance (security clamp) with an appropriate tool, according to

the indicated torque, until firm. Check all screw/bolt connec-

tions for firm fit according to the assembly step. Attention: self-

locking nuts which are loosened once again will become

unusable (destruction of clamping system) and must be replaced

with new ones.

■ For technical reasons, we reserve the right to carry out prelimi-

nary assembly work (e.g. addition of tubing plugs).

– EN –

Maintainance – Service – Spare Parts

■ Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged

parts should be replaced immediately and the equipment taken

out of use until this has been done. Use only original KETTLER

spare parts.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should be

serviced regulary (once a year) by specialist retailers.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

Spare parts order

■ When ordering spare parts, always state the full article num-

ber, spare-partnumber, the quantity required and the S/N of

the product (see handling).

Example order: Art. no. 07690-670 / spare-part no.

10100020 / 2 pieces / S/N ....................

Waste Disposal

KETTLER products are recyclable. At the end of its use-

ful life please dispose of this article correctly and safely

(local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

www.kettler.co.uk

+44 1527 591901

+44 1527 62423

sales@kettler.co.uk

e-mail:

KETTLER International Inc.

1355 London Bridge Road

Virginia Beach, VA 23453

www.kettlerusa.com

USA

+1 888 253 8853

+1 888 222 9333

sales@kettler.co.uk

e-mail:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler Axiom - 07690-670 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info