Bedienungsanleitung Kettler CHALLENGE 07940-740 (Seite 4 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

606582

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Instructions for Assembly

■ Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if

possible technically talented.

■ Please note that there is always a danger of injury when work-

ing with tools or doing manual work. Therefore please be care-

ful when assembling this machine.

■ Ensure that your working area is free of possible sources of danger,

for example don’t leave any tools lying around. Always dispose pack-

aging material in such a way that it may not cause any danger. There

is always a

risk of suffocation if children play with plastic bags!

■ The fastening material required for each assembly step is

shown in the diagram inset. Use the fastening material exactly

as instructed. The required tools are supplied with the equip-

ment.

■ Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt,

then use spanner to ﬁnally tighten nuts

completely against resistance (locking device).

Then check that

all screw connections have been tightened ﬁrmly.

Attention:

once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be re-

placed.

■ To pull off the pedal arms remove cap and screw (A). Grip the

pedal arm tightly, and screw in an M12 bolt (not supplied) into

the thread (B). After a few turns you may take off the pedal arm

(C).

■ For technical reasons, we reserve the right to carry out prelim-

inary assembly work (e.g. addition of tubing plugs).

■ Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary.

List of spare parts

When ordering spare parts, always state the full article number, spa-

re partnumber, the quantity required and the S/N of the product.

Example order: Art. no. 07940-750 / spare-part no. 10100030/ 2

pieces /S/N no.......

Important: spare part prices do not include fastening material; if fastening

material (bolts, nuts, washers etc.) is required, this should be clearly stated

on the order by adding the words

„with fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its useful life plea-

se dispose of this article correctly and safely (local refuse sites).

KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch,

Worcestershire B98 9HL · Great Britain

KETTLER International Inc. · P. B. 2747 · Virginia Beach · VA

23450-2747 USA

http://www.kettler.net

Handling the equipment

■ Before using the equipment for exercise, check carefully to ensure that

it has been correctly assembled.

■ Before beginning your ﬁrst training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■ It is not recommended to use or store the apparatus in a damp room

as this may cause it to rust. Please ensure that no part of the machine

comes in contact with liquids (drinks, perspiration etc.). This may cau-

se corrosion.

■ The machine is designed for use by adults and children should not be

allowed to play with it. Children at play behave unpredictably and

dangerous situations may occur for which the manufacturer cannot be

held liable. If, in spite of this, children are allowed to use the equip-

ment, ensure that they are instructed in its proper use and supervised

accordingly.

■ The exercise cycle complies with the DIN EN 957 - 1/5, class

HB. It is therefore unsuitable for therapeutic use.

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect upon

operation. Possibly occurring noise during reverse pedalling re-

sult from engineering and are absolutely safe.

■ Do not use corrosive or abrasive materials to clean the equip-

ment. Ensure that such materials are not allowed to pollute the

environment.

■ The exercise cycle has a magnetic brake system.

■ To operate correctly, the pulse function requires a minimum voltage of

2,7 volts (only for computers working with batteries).

■ The equipment is dependent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

■ Before use, always check all screws and plug-in connections as

well as respective safety devices ﬁt correctly.

■ Always wear suitable shoes when using.

■ All

electric appliances emit electromagnetic radiation when in ope-

ration. Please do not leave especially radiation-intensive appliances

(e.g. mobile telephones) directly next to the cockpit or the electronic

controlsystem as otherwise values displayed might be distorted (e.g.

pulse measurement).

■ The product is not suitable for use by persons weighing over

110 kg.).)

Kettler CHALLENGE 07940-740 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler CHALLENGE 07940-740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info