Bedienungsanleitung Kettler CURO M - CT1019-310 (Seite 5 von 26) (Deutsch, Englisch, Französisch)

736081

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Handling the equipment

• Before using the equipment for exercise, check carefully to ensure that it

has been correctly assembled.

• It is not recommended to use or store the apparatus in a damp room as this

may cause it to rust. Please ensure that no part of the machine comes in

contact with liquids (drinks, perspiration etc.). This may cause corrosion.

• The machine is designed for use by adults and children should not be

allowed to play with it. Children at play behave unpredictably and dangerous

situations may occur for which the manufacturer cannot be held liable. If, in

spite of this, children are allowed to use the equipment, ensure that they are

instructed in its proper use and supervised accordingly.

• The equipment is dependent of revolutions per minute.

• A slight production of noise at the bearing of the centrifugal mass is due to

the construction and has no negative effect upon operation. Possibly occurring

noise during reverse pedalling result from engineering and are absolutely

safe.

• The exercise cycle has a magnetic brake system. The braking system is

adjustable

• To operate correctly, the pulse function requires a minimum voltage of 2,7

volts (only for computers working with batteries).

• Before beginning your ﬁrst training session, familiarize yourself thoroughly

with all the functions and settings of the unit.

Care and maintenance

• To ensure that the safety level is kept to the highest possible standard,

determined by its construction, this product should be serviced regulary

(once a year) by specialist retailers.

• Please ensure that liquids or perspiration never enter the machine or the

electronics.

• This manual can be downloaded from www.kettlersport.com.

• The fastening material required for each assembly step is shown in the

diagram inset. Use the fastening material exactly as instructed. The required

tools are supplied with the equipment.

• Bolt all the parts together loosely at ﬁrst, and check that they have been

assembled correctly. Tighten the locknuts by hand until resistance is felt,

then use spanner to ﬁnally tighten nuts completely against resistance (locking

device). Then check that all screw connections have been tightened ﬁrmly.

Attention: once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be replaced.

• For technical reasons, we reserve the right to carry out preliminary assembly

work (e.g. addition of tubing plugs).

List of spare parts/ components page 22-23

When ordering spare parts, always state the full

article number, spare-partnumber,

the quantity required and the S/N of the product (see handling).

Example order: Art. no. CT1019-... / spare-part no. 68009150 / 1 pieces / S/N

....................

www.kettlersport.com

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please dispose

of this article correctly and safely (local refuse sites).

–EN –

200327 Manual Nova M CT1019-300 de_en_fr_selec HB 31.03.2020 12:05 Seite 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler CURO M - CT1019-310 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info