Bedienungsanleitung Kettler RACER S - 07988-756 (Seite 5 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

663011

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

List of spare parts page 40-42

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the pro-

duct (see handling).

Example order: Art.no. 07988-756 / spare-part no. 11701051

/ 1 pieces / S/N ....................

Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary.

Goods may only be returned after prior arrangement and in (in-

ternal) packaging, which is safe for transportation, in the original

box if possible.

It is important to provide a detailed defect description / damage

report!

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with

fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its

useful life please dispose of this article correctly and

safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

www.kettler.co.uk

+44 1527 591901

+44 1527 62423

sales@kettler.co.uk

e-mail:

KETTLER International Inc.

1355 London Bridge Road

Virginia Beach, VA 23453

www.kettlerusa.com

USA

+1 888 253 8853

+1 888 222 9333

sales@kettler.co.uke-mail:

mass is due to the construction and has no negative effect

upon operation. Possibly occurring noise during reverse pe-

dalling result from engineering and are absolutely safe.

■ The training device has a electromagnetic brake system.

■ The equipment is independent of revolutions per minute.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

■ Before use, always check all screws and plug-in connections

as well as respective safety devices ﬁt correctly.

■ Always wear suitable shoes when using.

■ Use for your regular cleaning, maintenance and care our ap-

pliance maintenance set (Article no. 07921-000) speciﬁcally

licensed for KETTLER Sports apparatus and available from the

Sport specialized trade.

■ For a comfortable training position please adjust the hand-

lebar andsaddle position to your body height.

■ Nobody may be in the moving range of a training person du-

ring training.

■ Calibration of the device can only be carried out by the ma-

nufacturer. Note: a calibration diagram is included.

Instructions for Assembly

RISK! Ensure that your working area is free of possible sour-

ces of danger, for example don’t leave any tools lying aro-

und. Always dispose packaging material in such a way that

it may not cause any danger. There is always a risk of suffo-

cation if children play with plastic bags!

■ Ensure that you have received all the parts required (see

check list) and that they are undamaged. Should you have

any cause for complaint, please contact your KETTLER dealer.

■ Before assembling the equipment, study the drawings careful-

ly and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■ The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if

possible technically talented.

■ Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca-

reful when assembling this machine.

■ The fastening material required for each assembly step is sho-

wn in the diagram inset. Use the fastening material exactly as

instructed.

■ Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device). Then check that

all screw connections have been tightened ﬁrmly. Attention:

once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be re-

placed.

■ For technical reasons, we reserve the right to carry out preli-

minary assembly work (e.g. addition of tubing plugs).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler RACER S - 07988-756 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler RACER S - 07988-756

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info