Bedienungsanleitung Kettler Ride 300 R - HT1007-100 (Seite 5 von 18) (Deutsch, Englisch, Französisch)

736069

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

– EN –

List of spare parts page 16-17

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the product

(see handling).

Example order: Art.no. HT1007-100 / spare-part no. 68009222

/ 1 pieces / S/N ....................

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please

dispose of this article correctly and safely (local refuse sites).

Instructions for Assembly

RISK! Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around.

Always dispose packaging material in such a way that it may

not cause any danger. There is always a risk of suffocation if

children play with plastic bags!

• Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

• Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.

The correct sequence is given in capital letters.

• The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-

sible technically talented.

• Please note that there is always a danger of injury when working

with tools or doing manual work. Therefore please be careful

when assembling this machine.

• The fastening material required for each assembly step is

shown in the diagram inset. Use the fastening material

exactly as instructed.

• Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resis-tance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device). Then check that

all screw con-nections have been tightened ﬁrmly. Attention:

once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be

replaced.

• For technical reasons, we reserve the right to carry out

preliminary assembly work (e.g. addition of tubing plugs).

•This manual can be downloaded from www.Kettlersport.com.

• The exercise cycle has a magnetic brake system. The braking

system is adjustable

• The training device functions RPM-independently.

•Please ensure that liquids or perspiration never enter the

machine or the electronics.

• Before use, always check all screws and plug-in connections as

well as respective safety devices ﬁt correctly.

• Always wear suitable shoes when using.

• Nobody may be in the moving range of a training person during

training

• The Home Trainer is intended only for indoor use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler Ride 300 R - HT1007-100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler Ride 300 R - HT1007-100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info