Bedienungsanleitung Kettler Rivo 2 - 07692-100 (Seite 17 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

736101

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

YT 6799

nstructions for pulse measurement

The pulse measurement starts as soon as the heart in the display

blinks in time with your pulse beat.

With hand pulse

n extra-low voltage caused by the contractions of your heart is

registered by the hand sensors and evaluated by the electronics

assembly of the device.

•

Always grab the contact faces with both hands.

• Avoid jerky grasping.

• Hold your hands calmly and avoid contractions and rubbing

on the contact faces.

Malfunctions or erroneous readings

After inserting the batteries and in case of faults or erroneous

readings press the “ ” button for longer (Reset).

Training Instructions

Sports medicine and training science use cycle ergometry,

among other things, for the examination of the functional capa-

bility of heart, circulation and respiratory system.

You can find out whether or not you have achieved the desired

effect from your training after several weeks using the following

method:

1. You manage a particular endurance performance with less

heart / circulation performance than previously

2. You sustain a particular endurance performance with the

same heart / circulation performance over a longer period.

3. You recover more quickly than previously after a particular

heart / circulation performance.

Guide values for the endurance training

Maximum pulse: maximum strain means the reaching of the

individual maximum pulse. The maximum achievable heart rate

is dependant on age.

Here, the following empirical formula applies: the maximum

heart rate per minute corresponds to 220 heart beats minus age

in years.

Example: age 50 years -> 220 – 50 = 170 pulse / min.

Load Intensity

Load pulse: the optimum intensity of load is reached at 65–75%

(see also diagram) of the maximum pulse. This value changes

depending on age.

Extent Of Load

Pulsediagramm

Fitness and Fat Burner

220

200

180

160

140

120

100

Pulse

Age

20 25 30 35 40 45 50 55 60 65 70 75 80

Maximalpulse

(220 minus Age)

Fitnesspulse

(75% of Max.Pulse)

Fat combustion pulse

(65% of Max.Pulse)

Duration of a training unit and its frequency per week:

The optimum extent of load is attained, if 65–75% of the indivi-

dual heart / circulation performance is achieved over a longer

period.

Empirical Formula:

Beginners should not begin with training units of 30-60 minutes.

The beginner’s training can be planned as follows in the first 4

weeks:

It is recommended that you perform approx. 5 minutes of exer-

cises before and after every training unit, in order to warm up

and cool down. There should be a training-free day between

each two consecutive training units, if you prefer training sessi-

ons of 20-30 minutes 3 times a week later on in your training.

Otherwise, there is no reason why you should not train daily.

Training frequency Extent of training session

3 times a week 2 minutes of training