Bedienungsanleitung Kettler Rower - 07985-895 (Seite 5 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

627773

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Handling the equipment

■ Before using the equipment for exercise, check carefully to en-

sure that it has been correctly assembled.

■ It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust. Please ensure that no part of

he machine comes in contact with liquids (drinks, perspiration

etc.). This may cause corrosion.

■ The machine is designed for use by adults and children should

not be allowed to play with it. Children at play behave un-

predictably and dangerous situations may occur for which the

manufacturer cannot be held liable. If, in spite of this, children

are allowed to use the equipment, ensure that they are in-

structed in its proper use and supervised accordingly.

■ The rowing machine is a training device which works on a

stroke rate dependent basis (independent of speed).

■ A slight production of noise at the bearing of the centrifugal

mass is due to the construction and has no negative effect

upon operation. Possibly occurring noise during reverse pe-

dalling result from engineering and are absolutely safe.

■ The training device has a magnetic brake system.

■ To operate correctly, the pulse function requires a minimum vol-

tage of 2,7 volts (only for computers working with batteries).

■ Before beginning your ﬁrst training session, familiarize your-

elf thoroughly with all the functions and settings of the unit.

are and Maintenance

■ D

amaged components may endanger your safety or reduce

the lifetime of the equipment. For this reason, worn or dama-

ged parts should be replaced immediately and the equipment

taken out of use until this has been done. Use only original

KETTLER spare parts.

■ To ensure that the safety level is kept to the highest possible

standard, determined by its construction, this product should

be serviced regulary (once a year) by specialist retailers.

■ Use for your regular cleaning, maintenance and care our ap-

pliance maintenance set (Article no. 07921-000) speciﬁcally

licensed for KETTLER Sports apparatus and available from the

Sport specialized trade.

■ Please ensure that liquids or perspiration never enter the ma-

chine or the electronics.

List of spare parts page 30-31

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the pro-

duct (see handling).

Example order: Art. no. 07985-895 / spare-part no. 68007345

/ 1 pieces / S/N .................... Please keep original packaging

of this article, so that it may be used for transport at a later date,

if necessary.

Goods may only be returned after prior arrangement and in (in-

ternal) packaging, which is safe for transportation, in the original

box if possible. It is important to provide a detailed defect des-

cription / damage report!

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with

fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its use-

ful life please dispose of this article correctly and safely

(local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

+44 1527 591901 +44 1527 62423

www.kettler.co.uk e-mail: sales@kettler.co.uk

KETTLER International Inc.

1355 London Bridge Road +1 888 253 8853

Virginia Beach, VA 23453 +1 888 222 9333

www.kettlerusa.com

USA



■ Bolt all the parts together loosely at ﬁrst, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device). Then check that

all screw connections have been tightened ﬁrmly. Attention:

once locknuts have been unscrewed they no longer function

correctly (the locking device is destroyed), and must be repla-

ced.

■ For technical reasons, we reserve the right to carry out preli-

minary assembly work (e.g. addition of tubing plugs).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler Rower - 07985-895 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info