Bedienungsanleitung Kettler Tempest 200 - 7880-000 (Seite 5 von 33) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

736152

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

55 5

Assembly Instructions

Running Tip: Running straight on the treadmill is made

easier by f ocussin on a f ixed oject in f ront of y ou in the

room. Rus as if y ou wanted to approach the object.

Importantly: Please keep the saf ety key in a saf e place

and ensure that it is kept out of reach of children!

Care and Maintenance

 D o no us e c orros iv e or abras i v e m at erials t o clean the

equipment. Ensure that such materials are not

allowed to pollute the env ironment.

 The electrical elements and components do not

require special maintenance. No alterations or repairs

(except maintenance checks) should be made to these

parts unless by a qualif ied electrician.

 When ordering spare parts, alway s state the f ull article

number, spare-part number, the quantity required and the

serial number of the product.

Example order: item no. 7880-000 / spare-part no.

68001000 / 1 pieces /serial no......

Important: spare part prices do not include f astening

material; if f astening material (bolts, nuts, washers etc.) is

required, this should be clearly stated on the order by

adding the words „with f astening material“.

Instructions for Assembly

 Ensure that y ou hav e receiv ed all the parts required

(see check list) and that they are undamaged. Should

y ou hav e any cause f or complaint, please contact your

KETTLER dealer.

 Bef ore assembling the equipment, study the drawings

caref ully and carry out the operations in the order

shown by the diagrams. The correct sequence is

giv en in capital letters.

 The equipment must be assembled with due care by

an adult person. If in doubt call upon the help of a

second person, if possible technically talented.

 Please note that there is always a danger of injury

when working with tools or doing manual work.

Theref ore please be caref ul when assembling this

machine.

Ensure that y our working area is f ree of possible sources of

danger, f or example don’t leav e any tools ly ing around.

Alway s dispose packaging material in such a way that it

may not cause any danger. There is alway s a risk of

suffocation if children play with plastic bags!

 The f astening material required f or each assembly

step is shown in the diagram inset. Use the f astening

material exactly as instructed. The required tools are

supplied with the equipment.

 Bolt all the parts together loosely at f irst, and check

that they hav e been assembled correctly . Then use

spanner to f inally tighten screws/nuts.

 Please keep original packaging of this article, so that

it may be used f or transport at a later date, if

necessary .

For technical reasons, we reserv e the right to carry out

preliminary assembly work (e.g. addition of tubing plugs).

Handling

Belt adjustment:

The running belt has been adjusted properly at the factory.

Howev er transportation, unev en f looring or other

unpredicted reasons could cause the belt to shift off center.

First unplug the power cord f rom the surge protector.

If the belt moves to the left:

Using the hex key prov ided, turn the lef t rear roller

adjustment bolt 1/4 turn in the clockwise direction. Plug the

power cord back into the surge protector and run the

treadmill at 4 km/h. You should see the belt start to correct

itself , mov ing back toward the center. Repeat the above

procedure until the walking belt is centered.

If the belt moves to the right:

Using the hex key prov ided, turn the right rear roller

adjustment bolt 1/4 turn in the clockwise direction. Plug

the power cord back into the surge protector and run the

treadmill at 4 km/h. You should see the belt start to

c orrec t it s elf , m ov ing bac k t oward t he c ent er. R epeat the

abov e procedure until the walking belt is centered. It may

be necessary to set walking belt tension once y ou hav e

completed this procedure if the belt f eels like it is slipping

while walking. Ref er below to the "Belt straightening"

instructions.

Belt straightening:

First unplug the power cord f rom the surge protector.

Using the hex key prov ided, turn both the lef t and right

rear roller adjustment bolts the same distance, usually a

1/4 turn in the clockwise direction. Plug the power cord

back into the surge protector and run the treadmill at 4

km/h. You should now walk on the belt to determine if the

belt is still slipping. Repeat the abov e procedure until the

walking belt is not slipping. Be very careful when

adjusting and straightening the belt. An extreme over

or under tension may damage the running belt! The

tension should be just tight enough not to slip.

KETTLER Ltd. • KETTLER House, Merse Road • North Moons Moat • Redditch, W orchestershire • B 98 9 HL • Great Britan

KETTLER International Inc. • P.O. Box 2747 • VA 23450 USA

www. k et t l e r . d e

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler Tempest 200 - 7880-000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler Tempest 200 - 7880-000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info