Bedienungsanleitung Kettler TOUR 300 - EM1011-400 (Seite 8 von 23) (Deutsch, Englisch, Französisch)

736072

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

obstacles is maintained. In the immediate vici-

nity of the main operational directions, nothing

else should be placed. There should be at least

one meter of free space surrounding the exer-

cise space. – Make sure that no one, other than

the

person who is training, is in the device space

when the device is in motion.

• Always observe the general safety rules and pre-

cautions for working with electrical equipment.

• Do not use a multiple power socket for the run-

ning belt. If an extension cable is being used, en-

sure that it complies with the VDE regulations.

• Unplug the power cord of the device from the so-

cket if not used for a longer period.

• The product is not suitable for use by persons

weighing over 130 kg.

• Nobody

may be in the moving range of a training

person during training

• This exercise machine may only be used for

exercises indicated in the training instructions.

• This training device has to be set up on a ho-

rizontal surface under all circumstances. Place

rubber or straw mats under it to deaden any noi-

se or impacts. Only for appliances with weights.

Avoid powerful oscillations of the dumbbells!

• When mounting the product please take the re-

commended torque information into account (

= xx Nm).

• The actual human performance can differ from

the mechanical performance shown.

• Please note: for devices without a freewheel, the

moving parts cannot immediately be stopped.

• The symbol identiﬁes devices in Protection

Class I.

• The symbol identiﬁes devices in Protection

Class II.

• The symbol identiﬁes devices in Protection

Class III.

• The training device corresponds with DIN EN

ISO 20957-1:2014/DIN EN ISO 20957-5:2017,

class HA.

• The device may only be used with the power

supply units delivered.

HRC Training Program

྇WARNING! If you lose the pulse signal, the per-

formance of the device will remain constant for

approx. 60 seconds and is then slowly adjusted

downwards. Please check your pulse measuring

system (ear clip, hand pulse or chest belt) so

that the pulse signal of the electronics can be

entered again.

INSTRUCTIONS FOR ASSEMBLY

྇RISK! Ensure that your working area is free of possible

sources of danger, for example don’t leave any tools lying

around. Always dispose packaging material in such a way

that it may not cause any danger. There is always a risk of

suffocation if children play with plastic bags!

྇WARNING! Please note that there is always a danger of in-

jury when working with tools or doing manual work. There-

fore please be careful when assembling this machine.

• Ensure that you have received all the parts required (see

check list) and that they are undamaged. Should you have

any cause for complaint, please contact your KETTLER

dealer.

• Before assembling the equipment, study the drawings ca-

refully and carry out the operations in the order shown by

the diagrams. The correct sequence is given in capital let-

ters.

• The equipment must be assembled with due care by an

adult person. If in doubt call upon the help of a second per-

son, if possible technically talented.

• The fastening material required for each assembly step

is shown in the diagram inset. Use the fastening material

exactly as instructed.

• Bolt all the parts together loosely at ﬁrst, and check that

they have been assembled correctly. Tighten the locknuts

by hand until resistance is felt, then use spanner to ﬁnally

tighten nuts completely against resistance (locking device).

Then check that all screw connections have been tightened

ﬁrmly. Attention: once locknuts have been unscrewed they

no longer function correctly (the locking device is destroy-

ed), and must be replaced.

• For technical reasons, we reserve the right to carry out

preliminary assembly work (e.g. addition of tubing plugs).

• For a comfortable training position please adjust the hand-

lebar andsaddle position to your body height.

HANDLING THE EQUIPMENT

• Before using the equipment for exercise, check carefully to

ensure that it has been correctly assembled.

• It is not recommended to use or store the apparatus in

a damp room as this may cause it to rust. Please ensure

that no part of the machine comes in contact with liquids

(drinks, perspiration etc.). This may cause corrosion.

• The machine is designed for use by adults and children

should not be allowed to play with it. Children at play be-

have unpredictably and dangerous situations may occur for

which the manufacturer cannot be held liable. If, in spite

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler TOUR 300 - EM1011-400 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler TOUR 300 - EM1011-400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info