Bedienungsanleitung Keurig 2.0 K550 Brewer (Seite 15 von 55) (Englisch, Französisch, Spanisch)

562625

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

28 29

CONTINUE

Time to replace

the Water Filter!

NOT NOW

YES

Water Filter

Replaced?

NOT NOW

CONTINUE

Time to descale

the brewer!

NOT NOW

Descaling is good maintenance.

Go to www.keurig.com

for instructions.

CANCEL

SECTION 2

MAINTENANCE ALERTS

Your brewer is designed to deliver the perfect cup time after time, year after year. To keep

it working at peak performance, your Keurig

2.0 brewer will let you know when it needs a

little attention.

TIME TO REPLACE THE KEURIG

WATER FILTER (VISIT KEURIG.COM TO PURCHASE)

Your brewer will indicate “Time to replace the Water Filter!” after every 1,000 ounces

or two months. Once you’ve replaced the Keurig

Water Filter, press YES to re-set the

WATER FILTER REMINDER notices.

TIME TO DESCALE THE BREWER

Depending on the mineral content of your water, calcium deposits or scale may build

up in your brewer, this is why we recommend using bottled or ﬁltered water. Scale is

non-toxic but if left unattended can hinder brewer performance. Regularly descaling your

brewer every three to six months helps maintain the heating element, and other internal

parts that come in contact with water. Calcium deposits may build up faster, making it

necessary to descale more often.

You should promptly descale when the Touchscreen indicates “Time to descale the

brewer!” However, even if this is not indicated, you should continue to descale your brewer

every three to six months.

DESCALING YOUR BREWER

Before you begin, you will need a large mug, fresh water, Keurig

Descaling Solution and

access to a sink. Do not use a paper cup.

• Empty the water from the Water Reservoir. If there is a Keurig

Water Filter, remove and

set aside. Disable AUTO OFF features, if necessary (refer to page 20).

STEP 1: FIRST DESCALING SOLUTION RINSE

• Press and hold the Power Button to power the brewer off.

• Pour the entire bottle of Keurig

Descaling Solution into the Water Reservoir. Then

ﬁll the empty bottle with water and pour into the Water Reservoir. Press and hold the

Power Button to turn the brewer back on.

• Place a large mug on the Drip Tray and run a cleansing brew by pressing and holding the

Brew Button until 6 ounces of water has been dispensed. The brewer will automatically

stop dispensing after 6 ounces. Do not use a Keurig

brand pack. Pour the contents of

the mug into the sink.

STEP 2: SECOND DESCALING SOLUTION RINSE

• Repeat the cleansing brew process until the Touchscreen indicates “More Water Please.”

Let the brewer stand for at least 30 minutes while still on.

• After 30 minutes, discard any residual solution and rinse the Water Reservoir thoroughly.

STEP 3: FRESH WATER RINSE

• Ensure the Water Reservoir is ﬁlled with fresh water to and not beyond the MAX

FILL line.

• Place a large mug on the Drip Tray and run a cleansing brew. Pour the contents of the

mug into the sink.

• Repeat the cleansing brew process at least 12 times. You may need to reﬁll the Water

Reservoir at least one time during this process.

NOTE: If “Time to descale the brewer!” is still indicated after completing the procedure, repeat the descaling procedure above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keurig 2.0 K550 Brewer Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info