Bedienungsanleitung Keurig K-45 Elite Brewer (Seite 4 von 16) (Englisch)

562622

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Set-Up

Helpful Hints

1. Plug brewer into its own grounded outlet.

If the electric circuit is overloaded with other

appliances, your brewer may not function

properly. The brewer should be operated on

its own circuit, separate from other appliances.

2. Keep your brewer turned “ON.”

To brew a fresh cup of coffee, tea or hot cocoa

anytime you want, keep your brewer turned

“ON” all the time. However, you can set the

brewer to automatically turn off two hours after

your last brew. Follow the simple instructions

on page 10 to make using the brewer convenient

for you.

3. For the best tasting gourmet coffee, tea or

hot cocoa, Keurig recommends using bottled

or filtered water.

Water quality varies from place to place.

If you notice an undesirable taste in your

cup of coffee, tea or hot cocoa (such as chlorine

or other mineral tastes) we recommend you

consider using bottled water or water from a

filtration system. For best results, carefully

follow manufacturer’s instructions when using

any water filtration system.

4. Customize the size, flavor & brew that’s

perfect for you.

With the choice of over 200 varieties of K-Cup

packs and 3 brew sizes (Small Cup-5.25 oz.,

Small Mug-7.25 oz. and Large Mug-9.25 oz.),

your Keurig

brewer gives you endless options

to customize the size, flavor and brew that’s

perfect for you. For a strong, intense cup, select

an Extra Bold K-Cup

pack (with up to 30%

more ground coffee than regular varieties) and

brew size that’s right for you. The smaller the

brew size, the more intense flavor in your cup.

The larger the brew size, the less intense flavor

in your cup.

5. Remove K-Cup

pack after use.

Please see page 7 for brewing instructions.

6. Brewing into a travel mug.

To brew into a travel mug, simply remove the

Drip Tray Assembly and place the travel mug

on the Drip Tray Base.

7. De-scale brewer regularly.

Please see pages 11 and 12 for instructions.

Unpacking Instructions

1. Place brewer box on a large steady surface

(such as a table or countertop) or on the floor.

Open the box.

2. Remove enclosed literature.

3. Turn the box on its side with front of box

face down.

4. Reach into the box and grasp the plastic

bag that contains the brewer.

5. Carefully pull the plastic bag (and packaging

materials) toward you and out of the box. The

brewer will still be encased in the polyfoam

and be on its side.

6. Remove the top polyfoam packaging material.

7. Carefully lift brewer off of the bottom polyfoam

and place it upright on a flat, steady surface.

8. Lift plastic bag off of brewer.

9. Record the serial number for this brewer on

page 3 of this guide. The serial number can be

found on the bottom of the brewer box or on the

brewer behind the Drip Tray (when removed).

10 . Place the brewer upright on a flat, steady

surface. Remove tape holding Water Reservoir

in place.

We recommend you save all packing materials in

case future shipping of the product is necessary.

WARNING:

Keep all plastic bags away

from children.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keurig K-45 Elite Brewer Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info