Bedienungsanleitung Keurig Vue V 700 (Seite 8 von 15) (Englisch)

562629

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

SECTION 3

Using Your Brewer

SECTION 3

Using Your Brewer

Prepare Your Cup

Fill a 16 oz. plastic cup with ice. Do not use glass.

Remove the Drip Tray if necessary and place cup

under the Brew Head.

Brewing Over Ice

Choose Vue

™

Cup

Portion Pack

Make sure your Vue

™

Cup

features the Brew Over Ice Icon.

Lift the Brewer Handle, insert

the Vue

™

Cup into the Holder

and lower the Brewer Handle.

Select Beverage Type & Size

Select the “Brew Over Ice” tab. The Touchscreen will

display as pictured.

If making iced coffee, ensure “Iced Coffee” remains

highlighted. If making iced tea or iced café drinks,

select the correct beverage type.

Select your beverage size using the + and - buttons

at the bottom of the Touchscreen.

* Available sizes for Iced Café are 6 oz. and 8 oz.

oz8

Iced Café

Tea +Iced Tea/Other

Strong

Café

Coffee & Tea

Brew Over Ice

Iced Coffee

Available Sizes*

What is a Cleansing Brew?

After brewing certain Vue

™

Cup portion pack varieties such

as hot cocoa, iced tea or a café beverage, we recommend

performing a cleansing brew to clear your Brewer of traces

of the previous beverage. It is an easy 3-step process:

Step 1 Take a used Vue

™

Cup and peel off the lid. Discard

the lid and any filter which adheres to it. Ensure

the empty Vue

™

Cup is clean.

Step 2 Place the EMPTY Vue

™

Cup in the Brewer and

place a mug on the Drip Tray.

Step 3 Lower the Handle and press “BREW.” The Brewer

will dispense 8 oz. of hot water into your mug

and cleanse the Brewer. Once complete, discard

the water and carefully remove the Vue

™

Cup.

The cleansing is complete.

Stopping the Brewing Process

If you need to stop the brewing process after it has started,

press and release the Power Button to turn the Brewer off.

The beverage flow will stop and the Brewer will shut off.

The Vue

™

Cup will be HOT after brewing. Use caution when

removing. Allow it to cool completely before handling.

To turn the Brewer back on, place an empty mug on the

Drip Tray and press the Power Button. Since the previous

brew was interrupted, some water may drip into the mug

during preheating.

We recommend that you perform a cleansing brew before

brewing your next beverage (see above). If this is not done,

the Brewer may deliver an additional amount of water for

your next beverage.

Dispensing Hot Water

If you need hot water for cooking (instant soup or oatmeal,

for example), place a cup or bowl below the Brew Head.

Place your cup or bowl as far back as possible. Lift and

lower the Handle WITHOUT inserting a Vue™ Cup. Select

“Coffee” (do not select “Strong”) and press “BREW.” The

Brewer will dispense hot water into your cup or bowl.

Step 1

Step 2

Step 3

Press

& Enjoy!

Do not remove mug or lift the Brewer Handle until “Enjoy!”

appears on Touchscreen.

Remove the Vue

™

Cup after brewing is complete.

The Vue

™

Cup will be HOT after brewing. Use caution when removing.

Allow it to cool completely before handling.

14 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keurig Vue V 700 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info