Bedienungsanleitung Kicker SX900.4 (Seite 10 von 20) (Englisch)

508865

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

SX .4 Series Amplifiers

Operation

14.) Komp Adj. - This adjusts the KOMPRESSOR

activation threshold point. Range is +24 dB to -24 dB to

allow for different sized speakers or listener tastes. 0 is the

default factory setting.

There are two KOMP ADJ. menus, one for AMP 1 and one

for AMP 2. This allows each amplifier to have its own

individual setting.

Use the

UP and DOWN keys to

select

AMP-1 or AMP-2 Press ENT to

select.

Use the

UP and DOWN keys to

adjust your setting and then press the

ESC to return to the KOMP ADJ.

AMP-1 / AMP-2 menu.

Now use the

UP and DOWN keys

to select the other amplifier for

adjustment. Press

ENT to select

Use the

UP and DOWN keys to

adjust your setting and then press the

ESC to return to the KOMP ADJ.

AMP-1 / AMP-2 menu.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

You can now press the ESC key to

return to the SYSTEM menu

NOTE...

While adjusting the KOMP ADJ. you will notice the

SYS

indicator on the ISIS VFD display is lit. This indicates you

are in a SYSTEM menu item. The

AMP 1 or AMP 2 indicators

will also light up to let you know which amplifier you are

currently adjusting.

HOME

ENT

ESC

SX .4 Series Amplifiers

Operation

9.) Mem Name - Here you can change the names of the

memory locations. The factory defaults are

Memory-1

Memory-2

Memory-3

Memory-4

Use the UP and DOWN keys to select the memory

location name you want to change and then press the

ENT key to select it.If you change your mind and do not

want to change the name, press and hold the

HOME key

for 1.5 seconds BEFORE making any changes.

The

ESC and ENT keys move the

cursor left or right to select which char-

acter to change.

Use the

UP and DOWN keys to

change the character displayed

(A, B, C...1, 2, 3...etc)

When you are finished press and hold

the

HOME key for 1.5 seconds to save

your new memory name.

Repeat the above steps to rename the other presets.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

PRESS &

HOLD

10.) REMOTE CTL - Here you select which amplifier is

controlled by the Remote Bass Level Controller. The options

are

BOTH AMPS, AMP-1 ONLY and AMP-2 ONLY.

Use the

UP and DOWN keys to

select which option you want to use

and press the

ESC key to return to

the SYSTEM menu.

11.)

Remote Adr - This feature is currently not used but is

reserved for future expansion.

12.)

Gain Range - Sets the input voltage window of the

UltraMatch gain control. The options are:

1V, 2V, 4V, 8V, 16V

Select the one closest to the maximum RCA input voltage

you expect to send to the amplifier.

Use the

UP and DOWN keys to

select your voltage. Press the

ESC

to return to the MAIN menu.

13.)

Bypass DSP - Bypasses all DSP

processing and sends the input signal directly to the

amplifier.

Use the

UP and DOWN keys to

select

BYPASS ON or BYPASS OFF.

Press the

ESC key to return to

the MAIN menu.

HOME

ENT

ESC

HOME

ENT

ESC

HOME

ENT

ESC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kicker SX900.4 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info