Bedienungsanleitung Kicker ZK 350 (Seite 4 von 20) (Deutsch, Englisch, Französisch, Spanisch)

508846

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ZK350STEREOSYSTEM

STBY DOCK

AUX

ASSTREB

USING THE SYSTEM MENU ROTARY CONTROL

The ZK350 Stereo System’s rotary control provides an intuitive user interface. The System Menu options listed on the

LED display below are available for adjustment by the rotary control. The rotary control knob is used as a push-button to

power on the ZK350 and to scroll through the menus available on the LED display. Turning the rotary control knob allows

you to adjust the parameters of the selected menu.

Use short pushes on the

rotary control knob to scroll

through menu selections. Use

a long push to turn the unit

on and off.

Turn the rotary control to adjust

the System Menu parameters.

After plugging the power supply into the DC input on the back of the ZK350, the unit will be in “Standby” mode, as

displayed by the LED display on the System Menu. Turn the power on by pushing the rotary control button once. When

the power is on, the “DOCK” LED will be illuminated on the System Menu.

Volume: By default, the ZK350 will be in volume control mode. Turn the rotary knob to adjust the volume up or down.

The rotary control will automatically revert to volume control mode after a short time period if any other menus have been

selected.

To scroll through the other menus, simply use the rotary control as a push-button. Each single button push will take you

from one menu to the next, rotating through TREB>BASS>DOCK/AUX and back to the volume control.

Treble: To adjust the treble on the ZK350, use the rotary control as a push-button to scroll through the menus until the

“TREB” menu is displayed on the LED display. Turn the rotary control knob clockwise to increase treble and counter-

clockwise to reduce treble.

Bass: To adjust the bass level on the ZK350, use the rotary control as a push-button to scroll through the menus

until the “BASS” menu is displayed on the LED display. Turn the rotary control knob clockwise to increase bass and

counterclockwise to reduce bass.

Input Source (DOCK/AUX): To enable the auxiliary input on the ZK350, an external device must be plugged into the

1/8” stereo auxiliary input on the back of the unit. Use the rotary control as a push-button to scroll through the menus

until your current input source (DOCK/AUX) is ﬂ ashing. Turn the rotary control clockwise and counter-clockwise to switch

between AUX and DOCK input. You may also enable auxiliary input by using the mode button on your remote control to

cycle through menus, then pressing the up/down arrows to select your input source.

Standby: In “Standby” mode, the ZK350 will be powered down, but your docked Zune will continue to charge as long

as a power source is plugged into the DC input on the back of the ZK350. To enter standby mode simply press and hold

the rotary control button until the unit turns off and “STBY” is illuminated.

Figure 4

ZK350 System menu

2009 ZK350 Multilingual h01.indd 42009 ZK350 Multilingual h01.indd 4 3/23/2010 11:04:12 AM3/23/2010 11:04:12 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kicker ZK 350 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info