483666
5
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
5
A
When you dont know which adjustment you have to use, please start with the low adjustment en slowly
raise the temperature until you have reached the wanted result.
7.1 Mounting the correct accessory
This tool is supplied with a set of accessories for dierent applications
Icon Description Propose
Glass protection nozzle Protecting windows when stripping frames
Spoon reector nozzle Soldering pipes.
Cone nozzle Welding, shrink sleeving (heat concentrated over small area)
Fish tail surface nozzle Drying, thawing (heat spread over wider area)
Scraper Stripping paint and varnish
Make sure that the tool is switches o and the nozzle has cooled down.
Set the desired accessory onto the nozzle.
8 OPERATION
Always observe the safety instructions and applicable regulations.
Use only one hand to hold the tool Do not place your other hand over the air vents
Prior to operation:
Mount the correct accessory for the application.
Set the desired air temperature.
8.1 Switching on and off
To switch the tool on, set the on/o switch to position I. Some smoke may be emitted after switching on;
this does not indicate a problem.
To switch the tool o, set the on/o switch to position O. Let the tool cool down before moving or storing it.
8.2 Stripping paint
Mount an appropriate accessory.
Set a high air temperature.
Switch the tool on.
Direct the hot air onto the paint to be removed.
When the paint softens, scrape the paint away using a hand scraper.
Do not strip metal window frames, as the heat may be conducted onto the glass and crack
it. When stripping other window frames, use the glass protection nozzle.
Use the scraper when you are stripping the window frames..
Do not keep the tool directed on one spot too long to prevent igniting the surface.
Avoid collecting paint on the scraper accessory, as it may ignite. If necessary, carefully remove paint debris
from the scraper accessory using a knife.
8.3 Stationary use
This tool can also be used in stationary mode.
71805 Manual.indd 5 31-12-10 15:20
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kinzo 71805 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info