Bedienungsanleitung Kiss dp 600 (Seite 24 von 39) (Englisch)

137022

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

english

Audio Settings

Audio mode: Enter this option to select between Stereo and Surround speaker setup of your system. If you

select Stereo, Surround media playback will be down mixed to 2 channel Stereo output for TV or Hi-Fi Stereo

systems. If you select Surround and connect an A/V-Receiver, the 5.1 digital and analog outputs will be

dependent on the media format during playback, and the Audio Encoding selection.

Audio encoding: This option applies to Surround and WMA-Pro Surround modes only, and is PCM when

Audio mode is Stereo. Select RAW if you have a digital audio connection (S/PDIF Coaxial or Optical output)

to your A/V-Receiver which has a Surround decoder build in (like Dolby Digital / DTS 5.1 / WMA-Pro). In

surround mode, select PCM if you want the player to decode WMA-Pro Surround and output it on the Analog

5.1 connection on the rear of DP-600. Note that Audio Mode and Audio Encoding options are dependent on

each other, and all outputs are affected by the setting.

Network Settings

Network interface: Press this menu item to define how your player is connected to your local network. If

your player is connected to your hub/switch/router through a cable, choose “wired”. If you have a wireless

access point and prefer to use that for connection, choose “wireless”.

Automatic configuration (DHCP): For automatic configuration of the network settings, it is recommended

that this option is left enabled. With the DHCP option enabled you will not need to know how to set up a

network. Nor will you have to type anything in. Your player will have all its parameters (IP address, subnet

mask, DNS) automatically set by the router/switch/access point you have connected it to.

Disabling the DHCP option will enable you to manually configure the network details of your player. This

is only recommended for networks without a DHCP compliant switch/router/access point or a network

without Internet access. Please see the following paragraph for information on how to use the manual

configuration.

Network configuration: In the event that the player is connected to a router/switch/access point without

DHCP support or directly to a PC, enter this to configure the parameters used on your network manually.

The IP address is the unique address of your player on the network. Do not use the same address as either

your PC or other devices connected to the network. We recommend using 192.168.0.2. If another device on

the network has been configured with the same address, just increase the final digit (“2”) to a number not

used by other devices. Subnet mask should be set to 255.255.255.0. Default gateway should be set to the

same address as the device acting as your gateway to the Internet, usually 192.168.0.1. DNS should set to

the same address as the default gateway unless your Internet Service Provider has supplied you with another

one. Alternative DNS should only be filled out if provided by your Internet Service Provider.

Wireless Network Configuration: Use this menu option to select one of the available wireless networks.

The wireless networks on the list may be labelled as either “Unlocked” (available for free) or “Locked”

(networks that are available but require an encryption key). Select the network of your choice to establish

a connection. If you select a “Locked” network, your player will display an on-screen keyboard. Enter the

exact encryption key for your player to connect to the network. See below for more information on wireless

authentication and encryption keys.

Wireless authentication: The Wireless Authentication menu item allows you to set the type of encryption

used on your wireless network. Encryption is used to keep data exchange between your player and the

rest of your network scrambled. This is done in order to protect you from exposure of personal or sensitive

information to other wireless users in the vicinity.

For the player to be able to communicate with your wireless network, the encryption will need to be set

to exactly the same in the player as on the wireless router or access point you will be connecting to. If the

wireless router/access point is running with no encryption, your player should be set accordingly. However,

KiSS recommends that you always use encryption on your wireless network, so if possible please have your

router set to WEP or WPA encryption and enable WEP or WPA encryption on your player accordingly. If you do

not know what encryption is enabled (if any) in your wireless router/access point, please refer to its manual

on how to see or set it up.

Encryption key: If you are running an encrypted wireless network, all devices on your network will need

to share the same encryption key in order for them to communicate. Please enter this menu item to bring

up the on-screen keyboard where you will be able to enter the key you are currently using in your wireless

router/access point. If you do not know which encryption key is used on your wireless router/access point,

please refer to its manual for information on how to see it or set it up.

View current network settings: Enter this menu item to see the current network configuration.

english

Kiss dp 600 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info