Bedienungsanleitung Kitchen Originals TKG CCG 1000 (Seite 19 von 48) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

713579

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

TKG CCG 1000 - 141121

Assembly page 19/48

Fax +32 2 359 95 50

• Never forget to close the lid of the water tank before switching on your coffee maker.

• Check that your appliance is in the "coffee powder" mode and not in the "coffee mill"

mode. To do so, check that the indicator lamp of the coffee powder mode selector

switch is lit.

• Switch on the coffee maker with the ON/OFF switch. The pilot light of the switch will be

illuminated, indicating that your appliance works.

• When the coffee stops flowing, you will hear 3 beeps, the keep warm indicator lamp will

start flashing and the appliance goes to the keep warm mode for 2 hours before it

switches off automatically.

• When you remove the jug from the appliance, a non-drip valve will automatically operate

to stop any drops of coffee dripping onto the hotplate. Replacement of the carafe

automatically opens the non-drip valve and allows remaining coffee to filter through into

the jug.

• Wait until the brewing process is finished and the filter has run empty before removing the

jug.

PROGRAMMING THE COFFEE MAKER

• You can programme your coffee maker to brew fresh coffee at a preset time, both in the

coffee powder mode and in the coffee mill mode.

• To do so, proceed as follows:

− Make sure the coffee maker’s clock is set to the right time.

− Press on the programming button until the timer symbol flashes.

− Press the buttons for the hours and the minutes to set the desired brew time.

− When the brew time is set, and as the timer symbol is flashing, choose the coffee

powder mode or the coffee mill mode.

• If you choose the coffee mill mode (indicator lamp of the coffee powder mode

selector switch off), select the number of cups and the desired aroma and

confirm the programming by pressing the programming button. The timer

symbol will then be steadily illuminated.

• If you choose the coffee powder mode (indicator lamp of the coffee powder

mode selector switch lit), confirm the time programming directly by pressing the

programming button. The timer symbol will then be steadily illuminated.

• Once the programming has been confirmed, the LCD display shows the actual time

again. If you have chosen the coffee mill mode, the LCD display will show the number of

cups and the aroma of the last use and not the ones of your programming once the clock

mode is back. Do not worry as long as the timer symbol is lit, the programming is well

registered.

Attention: if you do not confirm the programming or if you do not press any key within 7

seconds, the brew time will be saved in the memory but the coffee maker will not be in the

programming mode.

• Pour the right amount of water into the water tank, put a filter into the filter holder and

add coffee powder (into the filter) or coffee beans (into the coffee bean compartment)

according to your programming choice. In both cases, the procedure is the same as for a

manual use except that you do not have to press the ON/OFF switch.

• When your preset brew time is reached, the coffee maker will start its brew cycle in the

same way as with the manual use.

• As with the regular brew cycle, an automatic two-hour keep-warm cycle will commence

after your coffee maker has finished brewing. When the 2 hours are over, the coffee

maker will automatically shut itself off.

• If you wish to delete a programming, press the programming button until the timer symbol

goes out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kitchen Originals TKG CCG 1000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info