17
TRANSPORT AND HANDLING
The loading and unloading of the appliance from the
transport vehicle must be made with suitable
equipment (fig. 9)
Important! For the appliance handling it is
necessary to take all the necessary precautions to
avoid damaging it and to avoid damage to persons
or property, respecting the instructions placed on the
packaging.
UNPACKING
Cut with scissors the two plastic ties that lock the
cardboard to the wooden base. Remove the
cardboard lifting it upwards (fig. 10) and release the
machine from polystyrene padding. Remove the
protective plastic bag. Make sure immediately that
the equipment is integral and in case of anomalies
DO NOT operate the appliance but contact the
Dealer.
Using protective gloves, lift the machine vertically
in two and place it in its intended location.
Carefully remove the protective PVC film from all
sides; if any traces of adhesive should remain,
remove them gently with a soft cloth and a neutral
product. It is recommended not to use wire sponges,
scrapers or abrasive, acidic or aggressive substances
that could irreparably damage the stainless steel
surfaces.
Ecological notes: all the various packaging
components must be disposed of according to
current regulations in the country of use of the
appliance. In any case, nothing must be released into
the environment.
Important! The packaging components can be
potentially dangerous for children and pets, make
sure they do not play with it!
BASIC SAFETY RULES
The responsibility of the operations to be performed
on the machine without following the instructions
provided in this manual is delegated to the user.
The main general safety regulations for the
installation are listed below:
• do not touch the machine with bare, damp or
wet hands or feet or without protection
(appropriate gloves and shoes)
• do not insert screwdrivers, kitchen utensils or
anything else between the guards and moving
parts
• operate only after disconnecting the machine
(not by pulling the power cord).
Fig. 9
Fig. 10
