7
Options and display description
Before using the appliance for the first time
carefully read this quick reference guide and the
assembly instructions!
The control panel of this dishwasher activates
pushing any button except cancel/off button. For
energy saving the control panel deactivates
automatically after 30 seconds if no cycle has
started.
Program selection button
Push “P” button (repeatedly) until selected program
number is shown on the display (P1...Px) - (see
Table of programs” - next page).
Start/resume button
Push this button to start the selected program: the
indicator lights up and goes off at the end of the
program. When the door is opened during a
washing cycle, the cycle is temporarily paused: the
Start indicator blinks. To resume the cycle push
Start button and close the door within 3 seconds.
Cancel/off button
Push this button to switch off the control panel.
If pressed when a program is running it cancels
the program ongoing draining water for 1
minute. If pressed when the dishwasher is
switched off, it drains any possible liquids from
dishwasher (1 minute process).
Salt indicator
When lit (at the end of the cycle), the salt reservoir
needs to be refilled.
Rinse aid indicator
When lit (at the end of the cycle), the rinse aid
dispenser needs to be refilled.
Wash time display
Indicated the cycle duration and the remaining time
(h:min).
With “Delayed start” selected it indicates the time
remaining until program start (h.00) - below 1h
(0:min).
If “Fx Ey” messages appears on the display,
see chapter “What to do if...”.
Delayed start button
Push the button (repeatedly) to delay the start of
the program. Adjustable from 1 to 24 hours.
With each press of the button, the delayed start
indicator increases by one hour and after 24 restarts
from 0. Then press the START button.
The dishwasher will start after the set time.
Tablet setting
This setting allows to optimize the cycle
performances according the type of detergent used.
Push the MULTIZONE button for 3 seconds (until
the indicator lights up) if you are using the
combined detergents in tablet.
If you are using powder or gel detergent, the Tablet
indicator on the control panel has to be off.
Multizone
Allows you to choose the washing zones. Press this
button (repeatedly) to select the wash zones:
both racks
only lower rack
only upper rack (including cutlery rack)
- indicator lits
Dynamic clean
Thanks to the additional power jets this option
provides a more intensive and powerful wash in the
lower rack, in the specific area.
Antibacterial rinse
This function activates an antibacterial rinse at the
end of the wash cycle, guaranteeing a further
reduction of bacteria. Press the utton to activate or
deactivate the function. This function can be used
with the programs indicated in the table of
programs. The dishwasher door must be kept shut
for the entire duration of the program in order to
guarantee reduction of bacteria. If the door is
opened the indicator lamp starts flashing.
