7. Load the racks
Make sure that the spray arms can turn freely and are not impeded by crockery or cutlery in the racks.
Detailed instructions on loading the racks are given in chapter "How to use the appliance", under "How to
load the racks".
8. Start the appliance
Press the START button.
9. Turn on the water tap and close the dishwasher
door
When the door is closed the dishwasher starts
automatically.
Wash cycle
If the appliance is switched off during a wash cycle, when
switched on again it will resume the cycle from where it
was interrupted. Care must be taken when opening the
door, as steam will escape!
10. End of programme
At the end of the programme an acoustic signal will sound.
The START indicator lamp switches off.
11. Open the door, switch off the appliance
Press the OFF button. All the indicator lamps switch off.
12. Turn off the water tap, unload the racks
Unload the appliance, starting from the lower rack in order to avoid any residual drips of water falling onto
crockery below.
7
Change the programme in progress:
- Press the RESET button.
- Close the door.
- (Water drains for up to 60 seconds).
- Open the door.
- Select a new programme.
- Press the START button.
