8
Maintenance
- use protective gloves.
- disconnect the appliance from the mains power supply.
GREASE FILTERS
Metal grease filters have an unlimited life and should be washed
once a month either by hand or in a dishwasher at a low
temperature and with a short cycle. Washing in a dishwasher can
cause grease filters to turn white, but this in no way affects
efficiency.
Pull out the handle to remove the filter.
Wash the filter and leave it to dry, proceeding in reverse order to
refit it.
REPLACING THE HALOGEN BULBS
IMPORTANT: Replace using 20W max G4 halogen bulbs only.
1. Disconnect the hood from the mains power supply.
2. Use a small screwdriver to gently prise (at the three points
indicated) the lamp cover off.
3. Remove the burnt-out lamp and fit a new one.
4. Replace the lamp cover so that it clicks into position.
ACTIVE CARBON FILTER (filter hoods only):
The carbon filter must be cleaned once a month in a
dishwasher at the highest temperature, using a normal
dishwasher detergent. Wash the filters on their own.
After washing, reactivate the carbon filter by drying it in
the oven at 100°C for 10 minutes.
Change the carbon filter every 3 years.
Fitting the carbon filter:
1. Remove the grease filter.
2. Turn the side knobs 90° and then remove the filter
holder "g".
3. Fit the carbon filter "i" in the filter holder "h".
Reverse the above procedure to refit the filter holder and
grease filter.
WARNING:
