Bedienungsanleitung KitchenAid KGCC766 (Seite 8 von 28) (Englisch, Französisch)

712641

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

COOKTOP USE

Cooktop Controls

IMPORTANT: Your cooktop is factory-set for use with Natural

gas. If you wish to use LP gas, an LP Gas Conversion Kit is

included with your new cooktop. See the instructions included

with the LP Gas Conversion Kit for details on making this

conversion.

Electric igniters automatically light the surface burners when

control knobs are turned to Lite.

The large burners (17,000 Btu/h [British Thermal Units] and

12,500 Btu/h) provide the highest heat setting, and are ideal for

cooking large quantities of food or liquid, using large pots and

pans. The small burners (9,100 Btu/h and 6,000 Btu/h) allow

more accurate simmer control at the lowest setting, and are ideal

for cooking smaller quantities of food, using smaller pots and

pans.

Before setting a control knob, place filled cookware on the grate.

Do not operate a burner while using empty cookware or without

any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does

not ignite, listen for a clicking sound. If you do not hear the igniter

click, turn off the burner. Check for a tripped circuit breaker or

blown household fuse.

Check that the control knob is pressed completely down on the

valve shaft. If the spark igniter still does not operate, call a trained

repair specialist.

Proper grounding and polarity are necessary for correct operation

of the electric ignition system. If the wall receptacle does not

provide correct polarity, the igniters will become grounded and

occasionally click, even after the burner has ignited. Contact a

trained repair specialist to check the wall receptacle to see

whether it is wired with the correct polarity.

To Set:

1. Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control

knob turned to Lite will produce a flame.

2. Turn knob to anywhere between HI and LO. Use the following

chart as a guide when setting heat levels.

Power failure

In case of prolonged power failure, the surface burners can be lit

manually. Hold a lit match near a burner and turn knob

counterclockwise to LITE. After burner lights, turn knob to

setting. Do not use a grill or griddle accessory during a power

failure, as the vent fan will not operate.

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

SETTING RECOMMENDED USE

Lite

■ Light the burner.

■ Start food cooking.

■ Bring liquid to a boil.

Medium High

Between Med & Hi

■ Hold a rapid boil.

■ Quickly brown or sear food.

Med

Medium

■ Fry or sauté foods.

■ Maintain a slow boil.

■ Cook soups, sauces and gravies.

Medium Low

Between Med & Lo

■ Stew or steam foods.

■ Simmer.

■ Keep food warm.

REMEMBER: When cooktop is in use, the entire cooktop

area may become hot.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

KitchenAid KGCC766 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info