13
The hob automatically switches off if no function is selected within 10 seconds of switching on. If
you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions
for your induction hob, the message “no pot” will appear in the display (see figure on the left).
If no pot is detected within 60 seconds, the hob switches off.
When activating 5kW zone (only for models where available) ensure a proper pot is positioned on
that zone within 60sec prior to activate an other heating zone. Failing to do so could result in the cooktop
to switch off after a limited period of time needing restarting the activation procedure for each zone. The
same switch off behavior could result when the pot on 5kW operating zone is removed and an other
heating zone is being activated at the same time
To change the power level, move your finger horizontally on the slide touchscreen: the number inside the
circle will change with just a quick slide of the finger from a minimum of 1 to a maximum of 9. You can
activate the booster function by pressing “BOOST” on the slide touchscreen (“P” on the display).
If more than one cooking zone is on, the slide touchscreen allows you to change the power level of
the selected zone, indicated by the presence of a luminous dot at the bottom right of the power
level indicator. To select a zone, simply press the relative round key.
Switching off cooking zones
Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom
right of the power level indicator). Press OFF on the slide touchscreen.
The cooking zone switches off and, if the zone is still hot, the letter “H” appears in the circle.
“H” is the residual heat indicator. The hob is fitted with a residual heat indicator for each cooking
zone; these indicators alert the user when cooking zones are still hot. When the cooking zone cools
down, the display switches off.
Timer selection
The timer can be used to set a max. cooking time of 99 minutes.
Select the cooking zone to be used with the timer (a dot lights up at the bottom right of the power level
indicator), then set the required cooking time using the + and - keys of the timer function: the time in
minutes is shown next to the cooking zone display.
A few seconds after the key is pressed, the timer begins the countdown (the luminous dot of the selected
cooking zone starts flashing).
Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.
Control panel lock
This function locks the hob controls to prevent accidental switching on (e.g. during cleaning).
Press the key for three seconds: an acoustic signal sounds and an indicator light turns on above the lock
symbol to confirm activation. The control panel is locked with the exception of the OFF function. To
unlock the controls, repeat the child safety activation procedure. The illuminated dot switches off and the
hob is active again.
IMPORTANT: The presence of water, liquid spilled from pots or objects of any nature resting on the key
below the symbol can accidentally activate or deactivate the Control panel lock function.
Hold
This function allows you to temporarily hold and then resume cooking processes maintaining
previous settings (except for timer setting). Press the key: I I blinks on the display in place of
the power levels. To resume cooking, press the key again.
Description of automatic functions
The hob features automatic functions for each cooking zone. The symbols of the available functions are
shown next to the selection key of each cooking zone. Every time an automatic function is selected, an
indicator light turns on next to the symbol and the letter “A” appears in the cooking zone display.
