Bedienungsanleitung Kitchenbrothers KB724 (Seite 8 von 15) (Englisch, Holländisch, Französisch)

805998

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

14 15

Operating Instructions

The appliance, drying trays and dried food will become hot during and after use. Operate with atten-

tion, using an oven mitt to avoid skin burns when removing the trays.

Do not move the appliance whilst in use or when it is still hot.

Hot surfaces are still hot after use

Before First Use

Remove all packaging from your dehydrator and its accessories. Make sure all package contents are

included

Clean the trays with a moistened cloth.

Place the dehydrator base on a solid, level, heat-resistant, and non-slip surface. Plug in. Stack the drying

trays in the dehydrator

Run the dehydrator for 30 minutes at any temperature, without adding any food. Make sure that the

room has sufcient ventilation, in case the dehydrator produces any smoke or smells. This is normal.

Rinse the trays in water. Dry all parts. Note: You only need to do this the rst time you use the

dehydrator.

How to Use

Place the lled drying trays onto the embossed insertion levels. Make sure that the food does not touch

the protective grid in the rear part inside the appliance. Close the door of the appliance.

Plug in the Food Dehydrator and you will hear a “beep”. “8888” is displayed and after 5 seconds the

display changes to “0000”. The TIME/TEMP button will ash.

Set the temperature (35 - 75°C in 5°C steps) by pressing the TIME/TEMP once and the TIME/TEMP

button will light up continuously. The default temperature setting (70°C) will appear on the display,

and the “-” and “+”, and “Start/Stop” buttons will start blinking. You can reduce the temperature by

touching the “-” button. You can increase the temperature by pressing the “+” button. Press and hold

+ or - to change the temperature rapidly. If you don’t press any buttons within 5 seconds, the appliance

switches to waiting mode, and only the “START/STOP” button will blink.

Press the TIME/TEMP button again to set the time (30 min to 24 h - in 30 min steps). The default setting

is 10:00 h. The “-” and “+”, and “Start/Stop” buttons will start blinking. You can reduce the time by

touching the “-” button. Press and hold + or - to change the time rapidly. You can increase the time

by pressing the “+” button. If you don’t press any buttons within 60 seconds, the appliance switches to

standby mode.

Once all the required settings have been selected, you can turn on the Food Dehydrator by pressing

the “START/STOP’’ button. Once the appliance has started, the two dots in the centre of the display

are ashing. Once the preset drying time has been reached, the Food Dryer shuts off automatically. A

“beep” will sound 5 times and the display shows “End”. The “START/STOP” button will blink, touch the

button to conrm that the drying process has nished.

The appliance switches to “waiting mode” for 60 seconds and switches to “standby mode” after these

60 seconds. The “TIME/TEMP“ button blinks and “0000” is shown in the display. Pull the power plug

after each use for safe switch-off!

Pause the drying process for a short time

Touch the “START/STOP” button. The appliance switches to “waiting mode”. The two dots in the

centre of the display light up continuously.

To restart the drying process, touch the “START/STOP’’ button again. The two dots in the middle of the

display will start ashing.

If the appliance is not restarted within 60 seconds, it switches to “standby mode”. In this case the

“TIME/TEMP” button will ash.

Change temperature or drying time during operation

-Touch the “TIME/TEMP’’ button once to change the temperature or twice to change the time. The “+”

and “-” buttons and the display will ash. The setting can be changed with the “+” and “-” buttons.

Press the “START/STOP” button twice to conrm the new settings.

Ending the drying process before the set time has elapsed

Touch the “START/STOP” button. The appliance switches to “waiting mode” for 60 seconds. The two

dots in the centre of the display light up continuously. After 60 seconds, the appliance switches to

“standby mode” and the “TIME/TEMP” will ash.

Fan

-You can use the fan function to cool the dried food. The fan can be turned on when the temperature is

below 35°C.

Error codes

Time and Temperature Table

E1 Error in the electronic control. Contact our customer service.

E2 Error in the electronic control. Contact our customer service.

The appliance is protected against overheating. The appliance has automatically

switched off due to excessive temperatures.

Disconnect the mains plug and allow the appliance to cool down before turning it

on again.

Fruits Pretreatment Temperature Time

Apples

Wash, peel and remove cores. Cut into

slices or rings (5 – 7 mm thick).

Tip: If necessary, dip in a little lemon

water to prevent browning.

55 °C – 60 °C 5 – 7 hours

Apricots

Wash and remove stones. Cut into 2 or

4 pieces. Place with the cut side facing

upwards.

55 °C – 60 °C 20 – 24 hours

Bananas

Peel and slice (2 – 5 mm thick).

Tip: If necessary, dip in a little lemon

water to prevent browning.

60 °C 7 – 10 hours

Grapes

(seedless) Wash and cut in half. 55 °C – 60 °C 8 – 14 hours

Oranges Wash and slice (5 – 10 mm). 55 °C – 60 °C 5 – 8 hours

Peaches

Wash and remove stones. Cut into 2 or

4 pieces. Place with the cut side facing

upwards.

60 °C – 65 °C 8 – 16 hours

Kitchenbrothers KB724 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info