640448
7
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
12 13
[...continued] Before use
The following indicators can be seen on the TFT display screen:
Work mode:
The
icon shown in the top left corner of TFT display screen indicates that the camera is in video recording
standby state
Battery power:
The
icon shown in the bottom left corner of the TFT display screen indicates how much battery power is left
Resolution of video recording:
In the bottom left corner of the TFT display screen, 1080P/960P/720P/WVGA will show to indicate the video
recording resolution in standby mode
Spare storage capacity:
In the bottom right corner of the TFT display screen,
will indicate whether an external card is available and will
indicate spare storage capacity
In preview state, the camera will not respond to operations of “<” and “>”
The camera can be charged with the included cable. The red indicator on the top of the unit will flash slowly during
charging and will remain red once fully charged
Note: Before use, please check that there is enough battery power. If not, please charge the camera using the included
USB cable. The red indicator will flash slowly during charging and will remain red with the battery icon
displayed
on the TFT display screen after charging
2. Formatting the micro SD card
Please use a high-speed micro SD card only and format it on the camera before recording or taking a picture.
If the micro SD card has been used on other devices, please format it on the camera before any operation.
Note: Please confirm whether the files on the micro SD card are needed before operating. Locked files on the camera
can be formatted to remove. Formatting will wipe all data on the micro SD card
3. Setting the date and time
A yellow number indicates the current cursor position. By pressing the “<” or “>” key, you can move the cursor to the
setup interface
and select the date or time. Press the “OK” key to confirm, which will turn this number red and the
value of the date or time can be changed. Then press the “0K” key again to finish. Finally, move the cursor to using
the “<” or “>” key and press the “OK” key to confirm.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kitvision Edge HD10 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kitvision Edge HD10

Kitvision Edge HD10 Bedienungsanleitung - Deutsch - 18 seiten

Kitvision Edge HD10 Bedienungsanleitung - Holländisch - 18 seiten

Kitvision Edge HD10 Bedienungsanleitung - Französisch - 18 seiten

Kitvision Edge HD10 Bedienungsanleitung - Spanisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info