640444
12
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
22 23
• AttachingthecameratotheBodyPieceviatheTiltingHeadAdaptor(fordetailsonhowtoattachtheTiltingHead
Adaptor to your camera, please refer to ‘Attaching the Tilting Head Adaptor to your camera’, page 21).
Note:Thecamerapositioncanbeadjustedhorizontally,plusthecameraanglecanberotatedupwardsordownwards
by loosening or tightening the nut on the Tilting Head Adaptor.
• AttachingthecameratotheBodyPieceviatheQuickReleaseAdaptorandQuickReleaseAdaptorsocket(fordetails
on how to attach the Quick Release Adaptor with socket to your camera, please refer to ‘Attaching the Quick Release
Adaptor with socket to your camera’, page 21).
Note:Thecamerapositioncanbeadjustedhorizontallywhenusingthismethod.
• AttachingthecameradirectlytotheBodyPiece.
Note:Thehorizontalandverticalpositionofthecamerawillbexedwhenusingthismethod.
[continued...]
Mounting your camera
Mounting onto your board
Assembling the Flat Mount
• AttachtheFlatWingstotheleftandrightsideoftheBodyPieceaccordingly
Note: Please make sure you install the Flat Wings with the 3M adhesive facing downward and fit the gears of the
Flat Wings and the Body Piece correctly on both sides.
• Inserttheboltsthroughtheholesandtightenthenut
Note: The angle of the Flat Wings can be adjusted: simply loosen the nut, adjust the Flat Wings and re-tighten the nut.
Mounting onto your board
1. Peel off the 3M adhesive’s protective film on the left and right Flat Wings and attach the Flat Mount onto the board.
2. There are three ways to mount the camera onto the Body Piece:
Either use the Tilting Head Adaptor or Quick Release Adaptor socket to mount your camera onto the Body Piece or
attach your camera directly onto the Body Piece. Please note that the Tilting Head Adaptor provides a wider angle
to allow for greater adjustment
Rotate the nut
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kitvision-rush-hd100w-actioncamera

Suche zurücksetzen

  • Wo finde ich appActioncamera
    Kitvision Rush HD100W Eingereicht am 18-5-2024 13:10

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kitvision Rush HD100W Actioncamera wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info