Bedienungsanleitung KKT Kolbe EB8016ED (Seite 45 von 52) (Deutsch, Englisch)

784271

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Programming

Meat probe (AutoCook)

The meat probe monitors the temperature inside a dish

(core). For this, a target temperature is determined.

When it has been reached, the dish is considered ready

and the oven switches o automatically.

• In standby mode, connect the meat probe to the socket in

the cavity. „Prob“ and the probe icon will be displayed

• Select your desired heating type using the and keys.

• Press to conrm the setting .

• Aer that, press the and keys again to adjust the

temperature.

• Press the key again to conrm the setting.

• The small display will show the temperature and the large

display „Prob“.

• When the set target core temperature is reached, this will

be shown on the display.

Five beeps will signal the end of the cooking process.

Hints:

• The target core temperature can be set in the

range 50 - 150 °C. The operating temperature of

the oven is 165°C.

• While using this function, the automatic timer

cannot be set.

• If you unplug the meat probe from the socket, the

current operation will be canceled.

• If the display shows „ER-3“ aer the programme

has been started, this means a problem with the

meat probe. Please contact a qualied technician.

• Aer setting the temperature by pressing the key,

press to conrm the setting and start operation.

Hint:

Aer setting this function, the screen shows the

clock and „End“.

Press to inquire the end time (3 seconds).

Turning on the oven lighting

• Use the key to navigate to the lamp function

(until the icon lights up in the display).

• Press to conrm.

Child lock / key lock

Locking the control panel:

• Press and hold the and keys for 3 seconds.

A beep will sound and the icon will appear on the dis-

play indicating the key lock is activated.

Unlocking the control panel:

• Press the same key combination again – the key lock will

be released.

Energy saving function

• During in waiting state and reminding state , press

for three seconds, the display will turn itself o and set to

energy-saving mode.

• If there’s no operation in 10 minutes in waiting state, the

display will shut down and go into energy-saving mode.

• In energy-saving mode, press any key to quit the energy-

saving mode.

General operating notes

• The oven light is turned on in all heating modes except the

ECO-Funktion.

• When you have selected a heating type, but the key

is not pressed within 5 minutes, the current time will be

displayed (waiting state) and the selected function will be

recognized as invalid.

• To make sure that your input was detected right from the

SensorTouch-Control panel, a buzzer will sound.

Start / Pause / Cancel + Standby

• Start:

• Pause:

• Cancel + Standby: 2 times

Hint:

Press the key briey to interrupt the cooking

process. A long press will be recognized as invalid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

KKT Kolbe EB8016ED Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info