Bedienungsanleitung KKT Kolbe EB8019EDP (Seite 61 von 68) (Deutsch, Englisch)

784255

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Cleaning and maintenance

Before starting the pyrolytic mode

• Remove accessories and cooking utensils, including

pull-out rails and protective elements, from the oven

before starting the pyrolytic mode and ensure that the-

re is no spilled food in the baking chamber to achieve

the best cleaning results.

• Remove large amounts of dirt from the cooking cham-

ber manually.

• Clean the inside of the appliance door and the edges of

the cooking chamber in the area of the seal.

Do not scrub or remove the seal.

• While doing these operations, make sure that the oven

switched off.

Setting pyrolytic self-cleaning mode

• Use the key and then the slider or und to

select the pyrolytic mode .

• Make sure that there are no accessories or food in the

cooking chamber and close the door tightly.

• Press the key to start the pyrolytic mode.

At the start of operation, the control panel is automati-

cally deactivated and the oven door is locked until the

appliance has cooled down.

• Ventilate the room during pyrolysis operation.

Pausing and cancelling the pyrolytic mode

• When the pyrolytic mode is started, all other functions

of the appliance are automatically disabled.

• If you want to pause or cancel the pyrolytic mode, you

must rst unlock the control panel.To do this, press

and hold the key for 3 seconds, then you can pause

or cancel the operation with the key: Press once to

pause, press twice to stop pyrolytic mode.

However, the appliance door is only unlocked automati-

cally when the temperature is safe.

Pyrolytic mode settings

• The pyrolytic mode settings are factory set and cannot

be changed.

After starting, the pyrolytic mode can only be paused or

stopped as described above.

After the pyrolysis process has been completed.

• When the pyrolytic mode is completed, a continuous

acoustic signal sounds. To interrupt this, press the

key or wait for the alarm to stop automatically.

• When the appliance has cooled down to a safe tempe-

rature, you can open the door again.

• When the cooking chamber has cooled down, remove

the combustion residue/ash by wiping the cooking

chamber including the door area with a damp cloth.

• Replace pull-out rails, protective elements and acces-

sories in the oven.

• If you wish to start another heating mode after pyroly-

sis, you must rst release the automatic safety lock on

the control panel by pressing and holding the key

for 3 seconds.

Notes:

• During pyrolytic mode, the frame on the inside of the

appliance may discolour. This is normal and has no

effect on the function.

The discoloration can be removed with a stainless steel

cleaner.

• Heavy soiling can cause white deposits to remain on

the enamel surfaces. These are caused by food resi-

dues and are harmless. They have no inuence on the

functionality.

If necessary, you can remove the residues with lemon

juice or other cleaning agents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

KKT Kolbe EB8019EDP Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info