Bedienungsanleitung Klarbach HL32024 (Seite 8 von 16) (Deutsch, Englisch, Holländisch, Französisch)

717103

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Yes

Model identifier(s):FH103T-S/HL32024we

Item Symbol

Value Unit Item Unit

Heat output

Type of heat input, for electric storage

local space heaters only (select one)

Nominal heat

output

Minimum heat

output (indicative)

Maximum continuous

heat output

Auxiliary electricity

consumption

At nominal heat

output

At minimum heat

output

In standby mode

Pnom

Pmin

Pmax,c

elmax

elmin

elSB

0.9

N/A

manual heat charge control,

with integrated thermostat

manual heat charge control with

room and/or outdoor temperature

feedback

electronic heat charge control with

room and/or outdoor temperature

feedback

fan assisted heat output

Type of heat output/room

temperature control (select one)

single stage heat output and

no room temperature control

Two or more manual stages,

no room temperature control

with mechanic thermostat

room temperature control

with electronic room

temperature control

electronic room temperature

control plus day timer

electronic room temperature

control plus week timer

Other control options

(multiple selections possible)

room temperature control,

with presence detection

room temperature control,

with open window detection

with distance control option

with adaptive start control

with working time limitation

with black bulb sensor

Contact details Refer to Applicant Name/Address

Information requirements for electric

local space heaters

ENG

13 14

4. Turn the function setting switch from "I" to "II" to select your chosen

temperature.

To set the power, turn the dial from 0 towards I or II:

0 = Off = ventilation I = hot II = very hot

5. After reached the desired temperature, to maintain the temperature: turn

the thermostat knob counterclockwise until the light turns off. The desired

temperature will be kept constant by the thermostat function.

6. The heater comprises a protection device protecting against overheating. If

the heater overheats, a temperature limiting system inside the appliance will

automatically cut the power supply from the heating element while the

ventilator continues to function to cool the appliance. The appliance can re-

start as soon as the normal conditions and temperature needed for it to

function are re-established. Identify the causes of this overheating to avoid

any recurrences.

7. When not using this heater, return the 2 dials to their initial position: "0" and

"MIN. ", and then unplug it.

PRECAUTIONS FOR USE AND

MAINTENANCE:

1. Always unplug the appliance and keep it away from any socket before

cleaning.

To clean the outer surface of the appliance, use a lightly damp cloth. Then,

dry it thoroughly with a soft, dry cloth before using again.

Do not use any cleaning or chemical products of any kind. Do not let water

enter the openings on the heater.

2. When the appliance is not being used for prolonged periods, ensure that it is

fully unplugged from the socket and store in its packaging for simple storage

and later use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarbach HL32024 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info