777918
16
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
16
Console: Operation
Activating the treadmill:
Put the electrical plug in a grounded wall outlet and then turn on the
power switch on the front right side of the treadmill (see picture 1) .
As soon as the power is turned on a short sound is emitted that me-
ans the product is in stand-by mode. Attach the safety strap magnet
(see picture 2) in the round hole on the front of the control panel.
(The display shows ”- - -” if you have not attached the safety strap
on the front of the display).
Starting the belt:
Press the start button, The display counts down and beeps three
times. The belt starts at the lowest
speed (0,8km/h], the pre—set program time is 60 minutes.
Changing speed:
There are several ways of changing speed.
Increase/decrease speed with the arrow buttons on the control
panel.
Increase speed with the + / - button on the handrail.
Go straight to 3, 5, 7km/h with the quick choice buttons on the
control panel.
Changing program time before starting in manual control
mode:
Press the Mode button once (the display shows 30 minutes).
Select desired program time (total minutes) with the t/s
Press the start button, the display counts down and beeps three
times. The belt starts at the lowest speed (0,8km/h).
Select desired speed.
The display counts down from the selected time.
Choosing distance before start in manual control mode:
Press the Mode button twice (the display shows 1 km).
Select distance (total km) with the arrow buttons.
Press the start button, the display counts down and beeps three
times. The belt starts at the lowest speed (0,8km/h].
Select desired speed.
The display counts down from the selected distance
Using the twelve atomatic programs P01-P12
Press the PROG button until the desired program is shown in the display.
The pre-set time 30 minutes blinks in the display. Use the arrwo buttons to enter the desired time
(5-60 minutes).
Press the start button. The automatic program starts after a three second countdown.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Klarfit 10026386 Pacemaker X3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info