Bedienungsanleitung Klarstein 10032807 (Seite 17 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

778399

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Important: Clean the

milk frothing system

after each use to avoid

any milk residue. User

can simply wash the

milk tank and clean the

tube under tap water,

then ll in the milk tank

with clean water and

press clean button.

• Put on the milk tank cover, insert the milk tank assembly into the correct position.

Adjust the angle of milk foam spout to the right place by using the milk frothing

lever. This machine enables the user to adjust the foam ratio by rotating the knob

from Max to Min to enjoy the desired foam.

• Place single cup lter insert in sieve holder.

• Fill the lter with ne ground espresso coffee, press the coffee powder down into

the lter, using the at end of the measuring spoon to help.

• Insert sieve holder in the machine with the handle pointing to the left, turn the

handle to right until lock well with shower head. Press the cappuccino button.

• The button will be illuminated white and the unit will start working. The pump will

work intermittently to pump the water and the milk foam will come out to your cup

rst. After the milk foam nished, the unit starts to brew the coffee into the cup.

• The cappuccino brewing cycle will complete once the unit beeps once.

(4) Latte Brewing

• To detach the milk tank assembly, carefully hold the milk tank by one hand, and

press the button on right side of milk tank cover by another hand to remove the milk

tank assembly, gently move out the milk tank assembly to the side at the same time.

• Remove the milk tank cover by pressing the release button on the side of the milk

tank cover, ipping it up to one side and taking it off.

• Add the milk into the milk tank. Always ll the milk beneath the max mark. The

suggested temperature for milk is 4-8 °C.

• Put on the milk tank cover, insert the milk tank assembly into the correct position.

Adjust the angle of milk foam spout to the right place by using the milk frothing

lever. This machine enables the user to adjust the foam ration by rotating the knob

the Max to Min to enjoy the desired foam.

• Place one single cup lter insert in sieve holder.

• Fill the lter with ne ground espresso coffee, press the coffee powder down into

the lter, using the at end of the measuring spoon to help.

• Insert sieve holder in the machine with the handle pointing to the left, turn the

handle to right until lock well with shower head. Press the latte button.

• The button will be illuminated white and the unit will start working. The pump will

work intermittently to pump the water and the milk foam will come out to your cup

rst. After the milk foam nished, the unit starts to brew the coffee into the cup.

• The latte brewing cycle will complete once the unit beeps once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarstein 10032807 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info