778058
28
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
28
EN
OPERATION
Warning: Danger of personal injury
This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they
are occupied by persons not capable of leaving the room on
their own, unless constant supervision is provided.
1. Plug the heater power cord into the socket that matches the voltage and current of
the body nameplate.
2. Press the On/Off button to open the heater.
3. Press the Power Select button to select the gear position, a total of four gear power
selection, the gear position indicator icon displays the corresponding gear position
symbol.
4. Press the Up/Down button to select the setting temperature. The temperature setting
range is 5-45 degrees.
5. Press the Timer button to enter the timing setting state. Select the timed shutdown
time by the up/down button. The timing range is 0-24 hours. The timing indicator is
illuminated when the timer is running.
6. Press the Display button once, the digital screen only displays the room
temperature, and press the Display button twice to display only the heating symbol.
7. Press the Smart heating button, the heater enters the intelligent heating mode, the
gear position will automatically switch according to the temperature change, and
the intelligent heating operation indication icon will light when the intelligent heating
mode is running.
8. According to the Body sensor button, the heater enters the human body sensing
mode, and the heater heats up when the warming device detects a moving object.
Not detected, the heater stops heating after two minutes, and the body sensing
operation indicator lights up when the human body sensing mode is running.
9. Press the Set button and then press the child lock button, the heater is locked, press
any button, no response.
Unlock: Press the toggle button and then the child lock button.
10. Press the Set button and then press the up button to switch between Fahrenheit and
Celsius.
11 . Press the Set button and then press the button to reset the WI-FI.
12. Press the Set button and then press the gear button to select the window detection
function. When the window detection function is running, the WO lights up. When
the heater detects that the ambient temperature drops by 3 degrees Celsius or
more in two minutes, it stops heating. At this time, the window detection operation
indication icon is lit.
13. Press the Set button and then press the Display button to display the voltage.
14. Press the On/Off button again to shut down.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Klarstein 10034761 Smartwave wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info