Bedienungsanleitung Klarstein Herakles 4G - 10027054 (Seite 7 von 12) (Deutsch, Englisch, Französisch)

670285

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Safety Instructions

1. Read all instructions.

2. Unplug from wall when blender is not in use.

3. The cover (Lid) can only be opened when the blade has completely stopped rotating.

4. When cleaning, ensure that you unplug the appliance, the jug can be washed separately.

5. To protect against risk of electrical shock, do not submerge the motorized blender base in water

or other liquid or place in the dishwasher.

6. When in use, keep children away to prevent accidents.

7. Do not operate this appliance with damaged cord or plug or after appliance malfunctions or is

dropped or damaged in any manner.

8. Do not put the metal matter in the container. Such as knife, fork, scoop…

9. Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.

10. Do not place the machine on or near a hot gas or electrical burne, in a heated oven, or allow

machine to touch hot surfaces. External sources of heat can damage your appliance.

11. Do not use outdoors.

Operation

1. Place the container on the motorized base securely

2. Putthe food in the container. Please inpouring some uidity(such as water, milk, honey, fruit

juice… ) if it is solid food.

3. Covertherobberlid,thenputthemixingrodorllcap.

4. Plug and hold the container, then the machine will have one bumming. the LED window indicate

“00:00”, and the “TIME” indicator light is on. That mean machine is standby mode. Then you can

start the blending by two settings

Set the time and speeds before start.

a) Time setting

when machine in standby mode, the LED window indicate “00:00”, push “TIME” button, in default

status is “01:30”(1minute and 30 seconds) , you can push “+” or “-” to add or reduce the time,5

seconds’s change when you push the “+” or “-” each time. Such as push “+” button one time,

the time is “01:35”, push it again, the time is “01:40”… “-” button is opposite setting. Max time is

“02:00”, Min time is “00:00”.

b) Speed setting

push “SPEED” button, the “SPEED” indicator light will be on. in default status is “: 250. It is Max

speed), you can push “-” to reduce the speed, 1000 RPM’s change each time. Such as push “-”

button one time, the speed is “240”(push it again, the speed is “230”…,Min speed is “150”.

Completed above time and speed setting, then push “START/END” button, machine start working.

Start working, then set the time and speeds.

a) when machine in standby mode, push “START/END” button, machine start working with default

data(time is 01:30, speed is 250)

b) Push “TIME”or ”SPEED” button, then make the time or speed setting by “+” or “-” button.

Tips: you can change the speed or time by “+”/”-” button when blending.

6 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarstein Herakles 4G - 10027054 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info