Bedienungsanleitung Klarstein IC-F62D NXDN (Seite 17 von 125) (Englisch)

670352

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

PANEL DESCRIPTION

2-10

Category: Channel/Scan (Voting) (Continued)

Scan Add/Del (Tag)

z Push to add a channel to, or delete it from the

current Scan list�

• When a channel is added to the current Scan list, the

current Scan list text and “ON” are briey displayed.

• When a channel is deleted from the current Scan

list, the current Scan list text and “OFF” are briey

displayed�

z You can add a channel to, or delete it from a

selected Scan list�

1� Hold down for 1 second to display the “Scan Tag”

screen�

2� Push [Up] or [Down] to select a list�

3� Push [OK] to add a channel to, or delete it from

the selected list�

• When a channel is added to the selected Scan

list, the current Scan list text and “ON” are briey

displayed�

• When a channel is deleted from the selected Scan

list, the current Scan list text and “OFF” are briey

displayed�

4� Push [Back] to exit the “Scan Tag” screen�

z While a Scan is paused by detecting a signal on a

channel (except for primary or secondary channel),

push this key to remove the channel from the Scan

list�

TIP: When the Nuisance Delete function is ON,

the removed channel is automatically added to the

Scan list again, after the Scan is canceled�

High/Low

Push to select the transmit output power level

temporarily or permanently, depending on the

presetting�

C.Tone CH Select

In the Analog mode

Push to display the “C�Tone CH Select” screen� Then

push [Up] or [Down] to select a tone frequency or

code� After selecting, push [OK] to save�

Tone/RAN CH Select

In the Analog mode

Push to display the “C�Tone CH Select” screen� Then

push [Up] or [Down] to select a tone frequency or

code� After selecting, push [OK] to save�

In the Digital mode

Push to display the “RAN CH Select” screen� Then

push [Up] or [Down] to select a RAN code� After

selecting, push [OK] to save�

Monitor

z Push to turn the CTCSS (DTCS), 2-Tone, or 5-Tone

squelch mute ON or OFF�

L Only during 2-Tone mode operation, push to open any

squelch, or deactivate any mute functions�

L Only during 5-Tone mode operation, push to activate

one or two of the following functions on each channel

(Depending on the presetting):

- Hold down to unmute the channel (Audible mode)�

- Push to mute the channel (Inaudible mode)�

NOTE: The audible (unmute) mode may

automatically return to the Inaudible (mute) mode,

after the preset time period�

z Depending on the presetting, holding down this key

for 1 second may cancel the Scan�

Talk Around

Push to turn the Talk Around function ON or OFF�

L The Talk Around function equalizes the transmit

frequency to the receive frequency, for direct (Simplex)

communication�

Bandwidth

In the Analog mode

Push to temporarily set the channel width to Wide* or

Narrow�

L The wide passband width can be preset to either 25�0

kHz (Wide) or 20�0 kHz (Mid)�

Depending on the presetting, Mid channel width may be

selectable�

* The Wide channel width cannot be used in the USA

version transceivers�

Scrambler/Encryption

In the Analog mode

Push to turn the Voice Scrambler function ON or OFF�

L The Voice Scrambler function provides private

communication between stations by using a scrambled

code�

In the Digital mode

Push to turn the Encryption function ON or OFF�

L The Voice or Data Encryption function provides private

communication between stations by using an Encryption

Key and Key ID�

Compander

In the Analog mode

Push to turn the Compander function ON or OFF�

L The Compander function reduces noise components on

the transmit audio to provide clear communication�

Assignable Software key functions (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarstein IC-F62D NXDN Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info