Bedienungsanleitung Klarstein New Breeze 9 10029705 (Seite 18 von 66) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

653130

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Mode button

Press this button and the mode will circulate according to below sequence:

COOL > DRY > FAN

• COOL: Under this mode, cooling mode indicator is bright. Dual-8 nixie tube displays

set temperature. Temperature setting range is 16°C~30°C.

• DRY: Under this mode, drying mode indicator is bright. The display won’t display.

• FAN: Under this mode, the air conditioner only blow fan. Fan indicator is bright. Dis-

play won’t display.

Fan button

Press this button and the fan speed will circulate as “low speed > medium speed >

high speed > auto fan > low speed”.

Timer

Press timer button to enter into timer setting mode. Under this mode, press + or - but-

ton to adjust the timer setting. Timer setting will increase or decrease 0.5 hour by pres-

sing + or - button within 10 hours, while timer setting will increase or decrease 1 hour

by pressing + or - button beyond 10 hours. After timer setting is finished, the unit will

display temperature if there’s no operation for 5s. If timer function is started up, the

upper indicator will keep the display status. Others, it won’t be displayed. Under timer

mode, press timer button again to cancel timer mode.

Sleep

Press sleep button to enter into sleep mode. If the controller operates at cooling mode,

after sleep mode is started up, preset temperature will increase by 1°C within 1 hour

;preset temperature will increase by 2°C within 2 hours and then the unit will operate at

this temperature all the time; Sleep function is not available for fan mode, drying mode

and auto mode. If sleep function is started up, the upper indicator will keep the display

status. Others, it won’t be displayed.

Operation of Remote Control

After putting through the power, the air conditioner will give out a sound. Operation indictor is ON (red indica-

tor). After that, you can operate the air conditioner by using remote controller. Under on status, pressing the

button on the remote controller, the signal icon on the display of remote controller will blink once and the air

conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.

Under off status, set temperature and clock icon will be displayed on the display of remote controller (If timer

on, timer off and light functions are set, the corre- sponding icons will be displayed on the display of remote

controller at the same time); Under on status, the display will show the corresponding set function icons.

ON/OFF button Press this button to turn unit on/off.

Mode button

Pressing this button once can select your required mode circularly as below (the corres-

ponding icon will be lit up after the mode is selected): COOL > DRY > FAN.

• When selecting cool mode, air conditioner will operate under cool mode. Then press

+ or - button to adjust set temperature. Press FAN button to adjust fan speed.

• When selecting dry mode, air conditioner will operate at low fan speed under dry

mode. In dry mode, fan speed can‘t be adjusted.

• When selecting fan mode, air conditioner will operate in fan mode only. Then press

FAN button to adjust fan speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klarstein New Breeze 9 10029705 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info