Bedienungsanleitung Klipsch Groove PM20 (Seite 5 von 8) (Englisch)

584707

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Headphones: The 1/8” stereo headphone output jack, located on

the rear of the master speaker, turns off the two speakers. The main

volume control will adjust the headphone output.

Note: The PM20 LED indicator will light up purple when the

headphone jack is in use.

Aux: The Auxiliary input jack is used with portable audio players.

This signal will be mixed with the main source. To obtain the proper

balance with the main signal, the levels in the computer software and

in the portable player may need to be adjusted. An example would be

listening to an MP3 player while surﬁng the net and hearing associated

sounds from various websites. The mixed sound may not be desirable,

and you will ultimately determine how you use this feature.

Note: During playback of MP3 ﬁles, overall sound quality may

be perceptibly degraded compared to other audio sources such

as CD. This is caused by the encoding method and quality of the

MP3 ﬁle. Higher bit rates will yield a better listening experience.

Control Features

The LED indicator located on the front of the PM20 is used to indicate

the following states of the system.

Solid Red

The system is in “Standby” mode. Pushing the knob will turn the

system “On”.

Solid Blue

The system is “On”. Pushing the knob will put the system in

“Standby” mode. When the LED is solid blue the knob will adjust

the systems volume. Pushing and holding the knob for three (3)

seconds in this mode will put the system in bass level adjust mode

and cause the LED to ﬂash blue.

Flashing Blue

The system is in bass level adjust mode. The knob will adjust the

level of bass relative to the treble. When the knob has not been

adjusted in ﬁve (5) seconds, the LED will stop ﬂashing and the

knob will return to its default state as a system volume knob.

Solid Purple

The system is in headphone mode. Sound will only come from the

headphones connected to the headphone output on the rear of the

right satellite.

LED Indicator Color Guide

If no sound, ensure that:

- Power, input, speaker cables and connectors are securely attached.

- Software is properly installed and functioning.

- Computer sound (control panel) volume is turned up and not muted.

- Rotate volume knob clockwise, LED should be blue.

If one or more speakers have little or no sound, ensure that:

- All cables are connected properly.

- Connectors are fully “seated” in soundcard and speakers.

- Volume level controls are properly adjusted.

- Computer software audio settings are adjusted for proper use.

- Computer system’s sound (control panel) volume is turned up.

If the speakers exhibit distortion or buzzing:

- Turn down computer’s overall volume (via control panel) and

reduce speaker volume.

- Turn down bass volume, as program signal may be too strong.

- Plug the power cord into a surge protector.

If there is noise or hissing and the volume is low even with main

volume turned up:

- Turn up computer’s sound volume (via control panel).

- Turn down main volume on control pod to compensate.

- Ensure that software/hardware is properly installed and operating.

If there is computer monitor interference:

- Increase the distance between the speakers and the computer

monitor.

For more detailed information and FAQs, please visit www.klipsch.com.

Troubleshooting

DC Power Adapter

The PM20 is designed to be used only with the supplied DC power

adapter.

Speaker Impedance: 6 ohms nominal

Master Speaker Features: Main volume level control

LED indicator (power and mode)

Aux player line input with soundcard

mixing function

Headphone jack

Direct path interface

Passive speaker output RCA jack

Enclosure and Drivers: Ported enclosure with 2.5” long-throw

full-range driver

Ampliﬁer: High-efﬁciency Class D power section

and audio quality transformer designed

for uncompressed full power sound

Specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Klipsch Groove PM20 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info