Bedienungsanleitung Klipsch iFi Speaker System (Seite 8 von 50) (Italienisch)

584732

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

iFi SPEAKER SYSTEM

olume Up/Volume Down

Pressing the Volume Up button raises the sound level; pressing the

Volume Down button lowers the sound level.

Play/Pause

When the iPod is not playing, pressing the Play/Pause button once

will initiate play. When the iPod is playing, pressing the Play/Pause

button once will pause the current track. When the iPod is paused,

pressing the Play/Pause button once will resume play of the

current track.

Holding the Play/Pause button down for 3 seconds will switch the

iFi system and any iPod docked in it to Standby mode. The iPod

will continue to charge as long as the subwoofer’s Master Power

switch is On.

Skip Forward/Skip Back

When the iPod is playing, pressing the Skip FWD button will skip to

the next track in the playlist. Pressing the Skip REV button skips

back to the beginning of the current track. Pressing the Skip REV

button at the beginning of a track skips back to the previous track

in the playlist. Holding the Skip FWD or Skip REV button down for a

few seconds will fast-forward or rewind the current track.

Synching the Remote to the Control Dock

As shipped from the factory, the Control Dock does not require that

the Remote Control be synched, meaning any iFi Remote will

control the system. If a conflict arises with multiple units being

operated in close proximity to each other, the Remote can be

matched to the Control Dock by holding down the Play/Pause

button for 10 seconds while the system is On. The unit will go into

standby mode and after 10 seconds will be properly synched.

From that point forward, the system will only work with Remotes

that have been synched.

IMPORTANT: Unless there is a conflict, there is no need to synch

the remote control. When a conflict does arise, in order to keep the

remotes from synching to both systems, one system should be

unplugged while the remote for the other system is synching. Once

this procedure has been completed, it should be repeated for the

second system, being certain to unplug the first system.

If you have additional questions regarding your new iFi purchase,

please contact Klipsch customer service at 1-800-KLIPSCH.

Remote Control Battery Replacement

To replace the battery, remove the two screws on back of the

remote and disassemble as shown.

CARE AND CLEANING

The only thing you should ever need to do to your speakers is dust

them occasionally. Never apply any abrasive or solvent-based

cleaner or any harsh detergent. You can clean the grilles with the

brush attachment of a vacuum cleaner.

TROUBLESHOOTING

iPod does not dock properly in the system

• Make sure the proper docking adapter for your iPod is

inserted in the control dock.

• Remove the iPod; check the connectors on the control

dock and the bottom of the iPod to ensure there are

no obstructions.

No sound

• Make sure the power cord is connected to the rear of the

subwoofer and to an AC outlet, that the master power switch is

set to the On position, and that the iFi system is switched On.

The power LED on the control dock should be green.

• Make sure the iPod is seated properly in the control dock,

turned On, and playing.

• If an external device is connected to the control dock’s

auxilary input, make certain that device is On and playing.

If you are trying to listen to an iPod in the dock, unplug the

cable from the auxiliary input on the control dock.

• Make certain that the volume is turned up, as indicated by

the Light Bar on the control dock.

iPod not charging

• Make sure the iPod is properly seated in the control dock.

• Make sure the system is plugged in and that the Master

Power switch on the subwoofer’s rear panel is turned On. The

iPod will not charge if the Master Power switch is in the

Off position.

Remote control will not operate the system

• Make sure the battery is properly installed.

• If the battery is old, it may need to be replaced.

Remote control conflicts with another nearby iFi system

• To avoid conflicts the remote needs to be properly synched to

the system. Use the procedure detailed in the “Remote Control”

section to synch the remote control to the iFi control dock.

WARRANTY—U.S. AND CANADA ONLY

KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from

defects in materials and workmanship (subject to the terms set

forth below) for a period of one (1) year from the date of purchase.

During the warranty period, KLIPSCH will repair or replace (at

KLIPSCH's option) this product or any defective parts. Proof of

purchase in the form of a bill of sale or receipted invoice from an

authorized Klipsch dealer

which is evidence tha

t this product is

within the warranty period,

must be presented or included to obtain

warranty ser

vice.

This warranty does not cover damage due to

misuse,

buse, negligence, acts of God, accident, commercial use

or modifica

tion of,

or to any part of this product. This warranty does

not cover dama

ge due to improper opera

tion, maintenance or

installa

tion,

or attempted repair by anyone other than KLIPSCH or

someone authorized b

y KLIPSCH to do warranty work.

Any

unauthorized repairs will void this warranty

This warranty does

not cover product sold

AS IS or

WITH ALL FAULTS.

CR 2032 Lithium

manganese dioxide

coin ba

ttery

Klipsch iFi Speaker System Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Klipsch iFi Speaker System

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info