Bedienungsanleitung Klipsch RSW-10d (Seite 4 von 30) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

588342

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Management information. From this screen press the down

or up cursor key to access other control settings.

“Phase” - This screen is used to adjust the subwoofer’s acoustic

phase to match that of your main speakers. Use the Left/Right

cursor keys to adjust the subwoofer’s phase from 0° to 180°.

The proper setting of this control is highly dependant on room

acoustics and the position of your subwoofer in the room. After

setting the volume and lowpass controls set the phase to 0˚ and

listen to a recording with a prominent, repeating bass line in your

intended listening position. Repeat this process with the 180°

setting and use the setting that yields the greatest amount of

bass output. If neither of these settings is better than the other

experiment with intermediate settings. From this screen press the

down or up cursor key to access other control settings.

“Save Settings:” - This screen is used to store all of the above

control settings in one of three memory presets (“Music”, “Movie”

and “Night”). Use the Left/Right cursor keys to select the desired

preset and press the Enter key to store your current control set-

tings. “Settings Saved!” will be displayed. After the settings are

stored in memory the display will return to the default “Volume”

adjustment screen. From this screen press the up or down cursor

key to access other control settings.

“Disp Brightness” - This screen is used to adjust the brightness

level of the display screen. Use the Left/Right cursor keys to

select from any one of 4 different brightness intensities. From

this screen press the down or up cursor key to access other

control settings.

“Power:” - This screen is used to select the “Auto On” or the

“Always On” power mode for the Subwoofer’s amplifier. Use the

Left/Right cursor keys to select between these two modes. When

“Auto On” is selected, the subwoofer will automatically turn on

when it senses a signal. It will automatically turn off after 20

minutes if no signal is present and “Standby” will be displayed. In

the “Always On” setting the subwoofer will remain on as long as

the main A/C power switch on the subwoofer’s rear panel is in

the “ON” position. From this screen press the down or up cursor

key to access other control settings.

“Keypad Lock” - This screen is used to lock the keypad and

prevent your settings from being changed by other users. After

making all desired adjustments press the Center key to lock the

keypad. “Keypad Locked Hold and to unlock” will be

displayed. The display will then return to the default “Volume”

screen. To unlock the keypad press and hold the Left and Right

keys until “Keypad Unlocked” is displayed. The display will again

return to the default “Volume” screen. It is suggested that you

write down all of your settings for future reference in case the

keypad is unlocked and your settings are changed by

another user.

For more information on the controls mentioned in this manual

and on the bass management settings of your electronics, see

your authorized Klipsch dealer or visit www.klipsch.com.

BACK PANEL FEATURES

“POWER” ON/OFF - This is the main A/C power switch for the

subwoofer. This switch must be in the “ON” position for the sub-

woofer to operate and for the “AUTO/ON” feature to function. Set

this switch to the “OFF” position if the subwoofer will not be used

for an extended period of time (i.e. vacation).

IR SENSOR - An infrared remote control sensor is included on

the rear panel of your subwoofer for integration with A/V remote

control systems. The IR codes for this subwoofer can be obtained

by visiting www.klipsch.com. A dedicated hand held remote

control does not exist for these models.

CARE AND CLEANING OF YOUR POWERED SUBWOOFER

Your subwoofer has a durable vinyl finish that should only require

dry dusting or cleaning with a dry cloth. Avoid the use of abrasive

or solvent-based cleaners and harsh detergents. The brush

attachment of your vacuum should remove any dust from your

subwoofer enclosure.

WARRANTY — U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United

States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product

to be free from defects in materials and workmanship (subject to

the terms set forth below) for a period of five (5) years from the date

of purchase. During the Warranty period, KLIPSCH will repair or

replace (at KLIPSCH’s option) this product or any defective parts

(excluding electronics and amplifiers). For products that have

electronics or amplifiers, the Warranty on those parts is for a period

of two (2) years from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH authorized

dealer from which you purchased this product. Proof of purchase in

the form of a bill of sale or receipted invoice, which is evidence that

this product is within the Warranty period, must be presented or

included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number has

been altered or removed from this product or (b) this product was

not purchased from a KLIPSCH authorized dealer. You may call

1-800-KLIPSCH to confirm that you have an unaltered serial

number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will

automatically terminate prior to expiration if this product is sold or

otherwise transferred to another party.

RW-10d, RW-12d, RSW-10d

Klipsch RSW-10d Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info