Bedienungsanleitung Klipsch RT-10d (Seite 5 von 36) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

588337

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

interface with A/V Control systems that can utilize a USB hookup.

Please contact your authorized Klipsch dealer or Klipsch Technical

support for more information.

“MIC IN” – Plug the supplied microphone into this jack when

using the “ROOM CORRECTION” feature during setup. It is rec-

ommended that the microphone be disconnected and stored in a

remote location during normal use to avoid damage from loud

playback levels.

“LINE OUT” – This pair of connections can be used as an alter-

nate connection point for a second subwoofer. Be aware that the

signal output from these jacks is effected by the “Volume”, “EQ”,

“Lowpass”, “Lowpass Slope”, “Phase” and “Room Correction”

settings of your RT subwoofer. The advantage of this is the ability

of the RT subwoofers Adaptive Room Correction function to

correct the response the second subwoofer, resulting in a more

accurate response. If the secondary subwoofer is connected

directly to your system, the RT subwoofer’s room correction will

react to rather than control the response of the other subwoofer.

As a result we recommend the following procedure when

connecting a second subwoofer to these outputs.

• Play a signal, such as one of the RT subwoofer’s two demo

tracks, and set the volume control of the 2nd subwoofer to

approximately match that of the RT subwoofer.

• Defeat the secondary subwoofer’s low pass setting by

selecting the “Bypass” or “LFE” mode or set the low pass

control to its highest frequency if these options are not

present.

• Set the secondary subwoofer’s phase control to 0°

• Run the “Room Correction” function on the RT subwoofer

• As with the initial setup of your RT subwoofer, listen to a track

with a repeating bass line in your listening position. Experiment

with alternate phase settings on the secondary sub while

repeating this track. If one of these alternate settings yields an

increased amount of bass, choose that setting and run the RT

subwoofer’s room correction function again.

• Please note that if either the volume or phase settings on the

secondary sub are changed after running the Adaptive Room

Correction™ function you will have to run the RT subwoofer’s

room correction again to compensate.

CARE AND CLEANING OF YOUR POWERED SUBWOOFER

Your subwoofer has a sealed, wood veneer finish that should only

require dry dusting or cleaning with a dry cloth. Avoid the use of

abrasive or solvent-based cleaners and harsh detergents. The

brush attachment of your vacuum should remove any dust from

your subwoofer enclosure and grille.

WARRANTY — U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United

States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product

to be free from defects in materials and workmanship (subject to

the terms set forth below) for a period of five (5) years from the date

of purchase. During the Warranty period, KLIPSCH will repair or

replace (at KLIPSCH’s option) this product or any defective parts

(excluding electronics and amplifiers). For products that have

electronics or amplifiers, the Warranty on those parts is for a period

of two (2) years from the date of purchase.

To obtain Warranty

service, please contact the KLIPSCH authorized dealer from which you

purchased this product. Proof of purchase in the form of a bill of sale

or receipted invoice, which is evidence that this product is within the

Warranty period, must be presented or included to obtain Warranty

service.

This Warranty is invalid if (a) the factory-applied serial number has

been altered or removed from this product or (b) this product was

not purchased from a KLIPSCH authorized dealer. You may call

1-800-KLIPSCH to confirm that you have an unaltered serial number

and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will

automatically terminate prior to expiration if this product is sold or

otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due to

misuse, abuse, negligence, acts of God, accident, commercial use or

modification of, or to any part of, the product. This Warranty does not

cover damage due to improper operation, maintenance or

installation, or attempted repair by anyone other than KLIPSCH or

a KLIPSCH dealer which is authorized to do KLIPSCH warranty work.

Any unauthorized repairs will void this Warranty. This Warranty does

not cover product sold AS IS or WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS

WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.

`KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT

PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU

OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES

WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY

OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or

consequential damages or implied warranties so the above

exclusions may not apply to you. This Warranty gives you specific

legal rights, and you may have other rights, which vary from state

to state.

Klipsch RT-10d Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info